|
#890C1675P
Speedway 10-1/2 Inch Pressure Plate, 13.4 lbs
- Developed specifically for the sportsman circle track racer this pressure plate delivers a value that can't be beat
- This lightweight stock appearing pressure plate features a ductile iron pressure ring for maximum strength
- 13.4 pound design saves weight while still meeting minimum weight requirements of many rules
$155.99
/each
In Stock
Garage Sale alternatives: from $83.8
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
10.500" Diameter, 13.4 lbs. Weight
- Developed specifically for the sportsman circle track racer this pressure plate delivers a value that can't be beat
- This lightweight stock appearing pressure plate features a ductile iron pressure ring for maximum strength
- 13.4 pound design saves weight while still meeting minimum weight requirements of many rules
- Compatible with sprung hub or solid hub clutch discs with either organic or ceramic friction surface
- Works with stock or aftermaket flywheels that are drilled for a 10-1/2" clutch pattern
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 890C1675P Details
Speedway Motors 890C1675P Details
Speedway developed these 10.5" clutch pressure plates for sportsman circle-track racers. Includes a lightweight, stock-appearing pressure plate that features a ductile iron pressure ring. Can be used with solid or sprung hub clutch discs with organic or ceramic friction surfaces.
This pressure plate can be used with stock or aftermarket flywheels drilled for the 10.5” clutch pattern.
Tech Tip: When installing a new clutch, be sure to follow the manufacturer's instructions for correct set-up. You should also replace the pilot bushing/bearing.
Tech Tip: To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer. The amount of slippage this causes is worse than a night of racing.
Speedway Motors 890C1675P Specifications
Speedway Motors 890C1675P Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 890C1675P |
| Brand | Speedway Motors |
| Diameter | 10.500" |
| Weight | 13.4 lbs. |
| GENERAL | |
| Sold in Quantity | Each |
Ratings & Reviews
4.8
13 Reviews
Customers praise our product for its perfect fit, easy installation, and excellent quality for the money. It's highly recommended for various applications, from rebuilding dirt tracks race cars to street/strip setups. It boasts smooth operation, superb clutch engagement, and a nice pedal feel, especially when used in cars like a '68 Camaro. This pressure plate also pairs well with other items like a Ram 10 lb flywheel and Ram 6 paddle disk. Some customers also recommend our product over competitors like ACE, due to its superior quality and durability. An incident where a competitor's pressure plate sheared its mounting points emphasized the sturdiness of our product. However, a minor drawback is mentioned, where one customer found the material quality questionable after a malfunction during a critical race.
Ratings & Reviews
4.8
13 Reviews
Customers praise our product for its perfect fit, easy installation, and excellent quality for the money. It's highly recommended for various applications, from rebuilding dirt tracks race cars to street/strip setups. It boasts smooth operation, superb clutch engagement, and a nice pedal feel, especially when used in cars like a '68 Camaro. This pressure plate also pairs well with other items like a Ram 10 lb flywheel and Ram 6 paddle disk. Some customers also recommend our product over competitors like ACE, due to its superior quality and durability. An incident where a competitor's pressure plate sheared its mounting points emphasized the sturdiness of our product. However, a minor drawback is mentioned, where one customer found the material quality questionable after a malfunction during a critical race.
4.8
13 reviews
5
12
4
0
3
0
2
1
1
0
Most Liked Positive Review
5.0
good product for the cost
good product. we had an ACE pressure plate in our other car and it sheared its mounting points last week. we will buy one of these next, as the quality is better at the same weight.
Most Liked Negative Review
2.0
Not quality material
I bought this pressure plate and it worked well for a while. Then at the biggest race of the year during the feature, without any warning, the mounting points broke off and my weekend was over. After talking to some people, I am not the first person to have this happen to me with this part. Because of this, it cracked the case and bearing retainer on my transmission, ruined my clutch disc, broke my brand new throwout bearing and also put a big groove in my flywheel. I am not happy at all. This part didn't even last a full season. Now I have $1,000 worth of parts to replace.
Filter by Ratings
Perfect fit
5.0
2 years ago
Sam
Phoenix
Verified
Works as expected
Would Recommend
Installed and works
5.0
2 years ago
Sam
Phoenix
Verified
Installed without difficulty
Would Recommend
I would buy this product again
5.0
3 years ago
Bob
Fontana CA
Verified
I use these in a spec ate model stock car
Would Recommend
I will buy this product again and again!
5.0
5 years ago
DB
Sioux Falls SD
Verified
Best quality for the money!
Would Recommend
I would DEFINITELY recommend this!!!
5.0
5 years ago
Jereme
Colorado
Verified
Was correct on the weight and fit are rules. Vary satisfied with the product
Would Recommend
I would recommend this
5.0
5 years ago
KingDavid
Miami, Florida
Verified
I using this with a setup of 500hp. For a street/ strip application.
Would Recommend
Would buy again.
5.0
7 years ago
Buster
Troy,Missouri
Verified
Rebuilding Dirt track race car.
Would Recommend
Excellent pressure plate
5.0
8 years ago
Dave
Casper, Wyoming
Verified
Smooth operation, excellent clutch engagement.
Would Recommend
Great Product. Will buy again!!
5.0
8 years ago
Preacher man Tre' Faulkner
Nashville Tn
Verified
Great customer service also!!
Would Recommend
Very nice, well built, Just as listed, works very well.
5.0
9 years ago
Stevie G
Hollywood, FL
Verified
Nice pedal feel, in my 68 Camaro, good match with my Ram 10 lb flywheel and Ram 6 paddle disk. Good buy for the price, Wish I found this this pressure plate before I bought my last one.
Would Recommend
Showing 10 of 13 reviews
Questions & Answers
7 Questions • 7 Answers
Questions & Answers
7 Questions • 7 Answers
what type of hydraulic throw out bearing is best used with it? thank you.
by al
• 9 years ago
1 answer
View Answer
What is the mounting bolt circle dia?
by TG48
• 11 years ago
1 answer
View Answer
What's the pressure rating of this pressure plate?
by blackmopar21
• 11 years ago
1 answer
View Answer
Does this fit a gm 602 crate engine?
by Tom44
• 11 years ago
1 answer
View Answer
My rules state that we cannot mix one manufacturer with another. So what OEM type pressure plate is this. Chevy, Ford, Chrysler? thanks
by rccen44
• 11 years ago
1 answer
View Answer
what is the overall height and the diameter of the hole in the center?
by jnette
• 12 years ago
1 answer
View Answer
Is this steel or aluminum?
by somm50
• 12 years ago
1 answer
View Answer
7 of 7 questions shown