|
#91611067
Single Banjo Style Fuel Fitting, 5/16 Inch Hose
- Accepts 5/16" I.D. hose and works on any carb with 1/2"-20 inlet threads
- Stromberg 97 style carb or Rochester 2G will not need the spacer fittings
$31.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Universal Fit, Aluminum, 5/16" Hose barb Fitting End A
- Accepts 5/16" I.D. hose and works on any carb with 1/2"-20 inlet threads
- Stromberg 97 style carb or Rochester 2G will not need the spacer fittings
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 91611067 Details
Speedway Motors 91611067 Details
The cleanest way to plumb your multi carb set-up is to use banjo fittings. These 6061 T-6 aluminum fittings accept 5/16" I.D. hose and work on any carb with 1/2"-20 inlet threads. The Ford/Holley 94 carburetor will require spacers listed, which moves the banjo out to clear the carb body. Your Stromberg 97 style carb or Rochester 2G will not need the spacers.
Banjo fittings swivel 360 degrees while placing your lines closer to the carbs for maximum linkage clearance. The flange on the bolt slip fits into the banjo body keeping the fitting centered on the bolt. Large undercut on bolt and big hole will give excellent fuel flow. Teflon washers on both sides of the fitting seals the banjo.
These fittings work on all 2x2, 3x2, 4x2 and 6x2 intakes using Holley 94 or Stromberg 97 carbs. You need one single and one double for a 2x2, one single and two doubles for a 3x2, etc.
- Makes a perfect job when using rubber or plastic hose
- Great fitting to use when space is limited
- Fuel line is held tight to carb sides for maximum linkage clearance
- Precision made from 6061 T-6 aluminum alloy on a Swiss screw machine
- 32 micron polished finish
- Fits all Stromberg 97 - 48 - 81 style carbs, Ford/Holley 94 carbs, and Rochester 2G.
Speedway Motors 91611067 Specifications
Speedway Motors 91611067 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91611067 |
| Brand | Speedway Motors |
| Material Type | Aluminum |
| GENERAL | |
| Sold in Quantity | Each |
| Hose ID | 0.3125" |
| Thread Type | RH Male |
| Thread Pitch | 1/2"-20 |
| Fitting End A | 5/16" Hose barb |
| Fitting End B | 1/2"-20 Male o-ring |
| Angle | 90 degree |
| Wrench Type | Hex |
| Finish | Natural |
| Notes | Use replacement Teflon sealing washers 6174821 (9/16"x11/16") and 6174822 (5/8"x3/4") if needed. |
Ratings & Reviews
4.2
10 Reviews
The product's standout qualities include its perfect fit for Stromberg 97 Carburetors on Model A Ford cars and its ability to provide flexibility in fuel line routing. The material of the product is aluminum, contrasting some customers' expectation of metal. Some minor issues could occur, like leaking, if not properly tightened. It's crucial to note reports of not fitting Rochester 2g carbs without modification and of spewing fuel when further tightened. Despite this, customers appreciated its usability in creating a clean installation and potential for safety enhancement by reducing fuel lines and connections. Proper usage detailing in the product description was suggested as an improvement by a consumer.
Ratings & Reviews
4.2
10 Reviews
The product's standout qualities include its perfect fit for Stromberg 97 Carburetors on Model A Ford cars and its ability to provide flexibility in fuel line routing. The material of the product is aluminum, contrasting some customers' expectation of metal. Some minor issues could occur, like leaking, if not properly tightened. It's crucial to note reports of not fitting Rochester 2g carbs without modification and of spewing fuel when further tightened. Despite this, customers appreciated its usability in creating a clean installation and potential for safety enhancement by reducing fuel lines and connections. Proper usage detailing in the product description was suggested as an improvement by a consumer.
4.2
10 reviews
5
6
4
2
3
1
2
0
1
1
Most Liked Positive Review
5.0
Nice clean installation
I used the multi and single carb banjo fittings with the spacers for plumbing two ford 94 carburetors on a ford flathead V8. They make for a nice clean installation and look much better than running separate lines to each carburetor. I also think that less fuel line and fewer connections make for a safe setup. A engine fire can ruin your whole day.
Most Liked Negative Review
1.0
TERRIBLE PRODUCT!
What a waste of money! They spew fuel all over the engine, then if you try to tighten them more is squirts out like a fire hose. I bought 4 of these for a 2x4 intake on a sbc $80 down the drain...I wouldn't suggest these to my worst enemy!
Filter by Ratings
Happy
5.0
3 years ago
Mt
Marshall tx
Verified
Was as ordered
Would Recommend
sure
5.0
6 years ago
Opie
Baton Rouge La.
Verified
they are aluminum i was expecting metal
Adjustable Fuel Filling
5.0
7 years ago
Newms
Tallahassee, FL
Verified
Used on a Stromberg 97 carburetor. It allowed lexibilty in routing the fuel line from the fuel pump on my Model A Ford.
Would Recommend
Perfect Fit for Stromberg 97 Carburetor
5.0
7 years ago
Newms
Tallahassee, FL
Verified
Used for fuel line routing on a Model A Ford with Stromberg 97 Carbutertor.
Would Recommend
Great piece
5.0
8 years ago
Troy
Chesapeake 2
Verified
Works as it should. just what I needed.
Would Recommend
TERRIBLE PRODUCT!
1.0
8 years ago
Bill
Illinois
Verified
What a waste of money! They spew fuel all over the engine, then if you try to tighten them more is squirts out like a fire hose. I bought 4 of these for a 2x4 intake on a sbc $80 down the drain...I wouldn't suggest these to my worst enemy!
Would Not Recommend
Description is not accurate.
3.0
12 years ago
Diesel627
Undisclosed
These do not fit Rochester 2g carbs with out modification! U either need to cut them shorter, or use thicker gaskets.
Would Recommend
Good Product
4.0
14 years ago
Ben
Texas
Verified
You really have to get these tight with the supplied nylon washer to keep them from leaking gas.
Would Recommend
Nice clean installation
5.0
15 years ago
Flathead Mike
Iron Country, Minnesota
I used the multi and single carb banjo fittings with the spacers for plumbing two ford 94 carburetors on a ford flathead V8. They make for a nice clean installation and look much better than running separate lines to each carburetor. I also think that less fuel line and fewer connections make for a safe setup. A engine fire can ruin your whole day.
Would Recommend
Very nice
4.0
16 years ago
Two Fords
Edison NJ
Verified
Needs better use discription in Catalog
Would Recommend
Showing 10 of 10 reviews
Questions & Answers
Questions & Answers
Be the first to ask a question.