Ridetech 12289598 Truturn Kit w/ Spindles, 61-65 Falcon

• Includes new Ridetech spindles (compatible with 67-69 Camaro brake systems)
• Optional “Hub” Spindles offer the same geometry improvements as the pin spindle but add the performance and simplicity of late model Mustang hubs and brakes. Includes S550 2015-2023 Mustang hubs for maximum strength, consistent braking and reduced maintenance. Compatible with 2015-2023 Mustang brake systems, OE and aftermarket (caliper brackets included). Minimum 17″ wheels. Hubs fit Ford car 5 x 4.5″ lug pattern and include 14mm studs.
• Bump steer reduced to less than 1/16 inches
• Complete steering upgrade includes: Draglink (my require mini-starter for clearance), pitman arm (1 in. steering box sector shaft), idler arm, idler arm mount – compatible with manual steering, can be adapted to use Borgeson power steering system
• Zero to over 7 degrees of caster possible
• 1 1/8 inch solid front sway bar – rate 608 lbs/in
• When equipped with 225/40 -R18 tires, standard ride height is 22.75 inches ground to the fender lip
• Optional frame brace available to reinforce lower control arm mounts and subframe. Compatible with V8 engine mounts only.

Installation Instructions (PDF)