|
#92511925
$180.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Universal Fit, Fully Enclosed Housing Style, Painted
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThis all steel air cleaner is based off the 1951-1956 Olds & Caddy air cleaner. It uses an over-the-counter 14" x 4" replacement element. It's even notched out in the back to clear a GM HEI distributor. Fits 5-1/8" carb neck (most Holley, Quadrajet, Demon and Edelbrock carbs).
Includes all steel housing, steel top, paper filter element, carburetor stud, and unique rocket shaped wing nut.
For use on pre-1966 vehicles only
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 92511925 |
| Brand | Speedway Motors |
| Shape | Round |
| Overall Diameter | 14" |
| GENERAL | |
| Housing Style | Fully Enclosed |
| Fuel Intake Type | Single 2/3/4-Barrel |
| Inlet Diameter (Fraction) | 5-1/8" |
| Overall Length | 17.593" |
| Overall Width | 18.25" |
| Overall Height | 5.00" |
| Inside Diameter | 5.1" |
| Inlet Diameter (Decimal) | 5.125" |
| Housing Finish | Painted |
| Finish | Painted |
| Sold in Quantity | Each |
| Notes | Air cleaner uses 14" x 4" element and has notches at the rear for an HEI distributor. Intake openings on either side are 2.625" x 3.250". 91011084 washable, 54597081 paper. |
4.8
89 Reviews
The product's reviews suggest it's a high-quality, practical air cleaner that sits well on top of various car models, maintaining a classic vintage look. Users praise the fit, sturdiness and contribute to the engine compartment's original look. The air cleaner's material is heavy grade steel with a good quality finish giving it an impressive aesthetic. A few users mentioned spot welds showing, but this didn't detract from the overall satisfaction with the product's quality and capabilities. The batwing design and large filter size are appreciated, and many would purchase again.
4.8
89 reviews
5
76
4
10
3
3
2
0
1
0
Most Liked Positive Review
4.0
Olds-Cadillac Air Cleaner
Very pleased with the construction and shape of this air cleaner
Most Liked Negative Review
3.0
I would buy this product again
One flaw was the top edge of the air cleaner was wrinkled in 4-5 places and had to be repaired with glaze to get straight enough to paint. Second flaw was a spot weld was broke and had to be rewelded.
Filter by Ratings
I would buy again
5.0
a year ago
Hendrik
Hull Ia.
Verified
Good quality, I was happy with the product, if you're space is limited I would go with the smaller one , but it fit on my 1987 Chevy truck with a 350 and quadrajet carb.
Would Recommend
yes. the product is great
5.0
a year ago
sam
rochester ny
Verified
So closer to a original that without an original next to it you can not tell the different. the Olds, Cad and Packard are each different so this air cleaner blends in. A excellent price and product because original sell for $200 and up. great purchase
Would Recommend
yes
5.0
2 years ago
snake
paynesville minnesota
Verified
I replaced a billet air cleaner.... with this old school his air cleaner. it sure looks great
Would Recommend
I would buy this product again, its great quality
5.0
2 years ago
Pooch
Taylorsville, GA
Verified
It's in a 41 a Ford with a small block Chevy. Carter AVS Carb and it fits Great.
Would Recommend
Awesome air cleaner! Looks and fits great!
5.0
2 years ago
@54punkn
La Verne, CA
Verified
I've always loved the look of these air cleaners and wanted one for my car. I'm running it on a '54 Pontiac Star Chief with a '57 V-8 installed. It fits perfectly and looks good doing it.
Would Recommend
Looks good. Heavy duty.
5.0
2 years ago
GrayMatter
Iowa
Came quickly. Heavy duty. Looks awesome.
Would Recommend
I would but, I only need one.
5.0
3 years ago
bob
greenville, UT
Verified
fit like a glove..
Would Recommend
Yes I would
5.0
3 years ago
Ken
Chicago
Verified
Great
Would Recommend
Very nice piece that looks original,
5.0
4 years ago
Mike
Columbus Nebraska
Verified
I installed the sun and 1956 Oldsmobile after converting over to a Holley Sniper fuel injection unit and it allowed me to keep the original look to the engine compartment
Would Recommend
The best looking retro air cleaner
5.0
4 years ago
J
Houston TX
Verified
This is the Retro Air cleaner to get for your 1965 and under car.
Would Recommend
Showing 10 of 89 reviews
19 Questions • 10 Answers
The openings on either side of the air cleaner are 2.625" x 3.250" . What is the dia. of the openings? Would like to turn it into a cold air supply with addition of 3" tubing..
by John the can do kid
• 8 years ago
1 answer
View Answer
Is there a K&N filter element that will fit this?
by Dave
• 8 years ago
1 answer
View Answer
Will this fit a 324 rocket with an original 2 barrel on it?
by Doug
• 9 years ago
1 answer
View Answer
I know this will fit my Edelbrock Performer carburetor but has anybody had any experience putting it on it 360 LA series Dodge engine with a GM style HEI distributor just wondering if it's going to clear?
by Wayne
• 9 years ago
1 answer
View Answer
Do you have an adaptor for my carb. It has a 2 1/4 diameter neck
by Ed
• 10 years ago
1 answer
View Answer
Will this air cleaner work with the Street Demon 1901 carburetor?
by Steve
• 10 years ago
1 answer
View Answer
what type of paint finish is used and can i get the air cleaner not painted?
by glenn
• 10 years ago
1 answer
View Answer
Will it fit on an orignal Rochester 4 bbl carb for a 1960 Cadillac Coupe Deville?
by Leahi from Hawaii
• 10 years ago
1 answer
View Answer
Anyone know if this will fit on a small block ford? Was wondering if it clears the distributor being it is up front on ford motors?
by John
• 11 years ago
1 answer
View Answer
Will this fit a Edelbrock 4 barrel carb? It says it fits several manufacturers carbs and unless I just missed it somewhere it does not actually say if its for a 2 or 4 barrell.
by XtechX
• 11 years ago
1 answer
View Answer
10 of 19 questions shown
