Ram 910100 Pre-86 Chevy 23.5 LB Clutch/Flywheel Combo 1-1/8 10-Spline
Chevy Big Block V8, Ford Inline Four, 2-piece Rear Main Seal Style, 153 Tooth Count
- Designed to git the pre-1986 Chevy's
- Features a 153 tooth steel flywheel
- Disc is made out of a solid hub organic
- Will accept a 10 spline shaft
- Billet steel ring pressure plate is also included in the kit
It doesn’t get any lighter than this! This clutch combo gets you a 153 tooth steel flywheel, a solid hub organic disc and a billet steel ring pressure plate.
Tech Tip: When installing a new clutch, be sure to follow the manufacturers instructions for correct set-up. You should also replace the pilot bushing/bearing.
Tech Tip: To extend the life of your expensive racing clutch you should not use it to load the car on or in your trailer. The amount of slippage this causes is worse than a night of racing.
Item DetailsChevy Pre-1986, 1-1/8"
STREET DUAL DISC, HYDRAULICS, FLYWHEELS, MULTI-DISC CIRCLE TRACK
The above referenced units are strictly factory warranty only.
Units are not to be returned for warranty consideration to Speedway Motors.
EACH OF THESE UNITS ARE TAGGED WITH A FACTORY WARRANTY TAG/LABEL TO CONTACT RAM DIRECTLY FOR WARRANTY REPLACEMENT CONSIDERATION.
Warranty return must be processed with Ram directly and not Speedway Motors.
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
More Like This
Ram Clutches 900200 Street Stock Clutch Pre-86 GM 10.5 X 1-1/8-26
Ram Clutches 80-2125S Chevy Clutch/Flywheel, 1-1/8-26, 168 Tooth
Ram Clutches 80-2125 Chevy Clutch/Flywheel, 1-1/8-26, 168 Tooth
Ram Clutches 900100 Street Stock Clutch Pre-86 GM 10.5 X 1-1/8-10
Ram Clutches 910200 Street Stock Clutch Pre-86 GM 10.5 X 1-1/8-26
1955-1985 Small Block Chevy Stock Car Racing Clutch Kit
10-1/2 Inch Organic Clutch Kit, 1-1/8 Inch 10 Spline
Speedway 1955-85 Small Block Chevy Clutch Kit, 2 Piece Main Seal
Ram Clutches 910300 Street Stock Clutch, 86-Up GM 10.5 X 1-1/8-10
Ram Clutches 910400 Street Stock Clutch, 86-Up GM 10.5 X 1-1/8-26
Q & A
Finally, Project Chevelle gets a real hot rod engine under its hood! And what about that flimsy old column shift three-speed? We've got that covered too.
Pat talks about our LS flexplate options.
Tim talks about why using a new pedal assembly may be better for your project than the original pedal assembly.
We finally get to drive Project Chevelle after the big engine swap, and it's pretty awesome. Rowing through the gears with our new Tremec 5-speed isn't bad either!
There are a few things to consider before you select a replacement flexplate for your small-block Chevy engine. Speedway has some useful tips to follow that will help speed up the process.
One of the most challenging things about swapping transmissions can be figuring out the clutch linkage. Speedway can show you how to install the upgraded hydraulic throwout bearing with ease.
Brinn Clutch Rebuild Instructions