$1745 Off
$1745 Off
|
#721HK53GMF2RN
QA1 HK53-GMF2RN Level 3 Handling Kit with Narrowed 9in. Housing
- Complete Suspension Kit: Upgraded performance for street and track.
- QA1 MOD Shocks: Fine-tune your ride height and handling for a perfect stance and performance in any driving scenario.
- Custom 9" Rear Housing: Supports up to 800HP.
$10,978.95
/kit
Factory Shipped
$12,723.93
Save $1,744.98
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
75-81 Chevy Camaro, 75-81 Pontiac Firebird
- Complete Suspension Kit: Upgraded performance for street and track.
- QA1 MOD Shocks: Fine-tune your ride height and handling for a perfect stance and performance in any driving scenario.
- Custom 9" Rear Housing: Supports up to 800HP.
- Lightweight Front Suspension: Enhances control and reduces flex.
- Easy Installation: Bolt-on with minimal welding required.
Key Specs
| MFG. Part # | HK53-GMF2RN |
| Front Coil Springs Included | Yes |
| Rear Coil Springs Included | Yes |
| Rear Leaf Springs Included | No |
| Front Shock Struts Included | Yes |
Need To Know
Truck Shipment
Truck shipments must be pre-paid with a credit card, certified check or money order
Need help?
855.313.9176Quick and Easy Returns
Return PolicyQA1 HK53-GMF2RN Details
QA1 HK53-GMF2RN Details
QA1's Handling Kit is the premier suspension upgrade for '75-81 Camaro/Firebird (GM F-body) owners seeking exceptional handling. This kit replaces the front and rear suspension with QA1 MOD series 4-way adjustable coilovers and a narrowed QA1 9" rear housing, and four-link optimized for wider wheels and tires.
HUGE HANDLING GAINS
Experience superior handling with lightweight control arms that improve geometry and reduce flex. The adjustable four-link design eliminates wheel hop and improves traction and handling. Front and rear sway bars and subframe connectors minimize roll in tight corners. AGGRESSIVE STANCE Factory springs limit stance, but QA1's
MOD SERIES COILOVERS
and 4-link offer 2 inches of front adjustability and 1.25 inches in the rear for ideal ride height. The kit allows for massive 12-inch-wide wheels with 335 tires.
PERFORMANCE 9" REAR HOUSING
Strength: Fabricated center section with 3 OD, wall axle tubes support 800HP and 31 spline axles are rated to 650HP. Features: Standard options include powder coat, drain and fill plugs, jack pad, and all necessary hardware. Specs: Narrowed wheel mounting width: 56-1/8 (narrowed 2-1/2 per side for mini tubs) Big Ford New Style Torino Axle Flanges with 2.5 axle offset Bolt pattern: 5x4-3/4 for easy wheel compatibility Wheel studs: x 3 for alloy wheels Requires third member for Ford 9 housings with 31 spline axles EASY INSTALL The QA1 Handling Kit features a straightforward installation. The rear crossmember needs minimal MIG welding, and all other components are direct bolt-in.
MADE IN THE USA
Components manufactured in the USA
FITMENT NOTES
Narrowed housing is recommended for custom offset wheels and mini tubs Verify wheel and tire fitment on the vehicle Mini tubs required for maximum tire width Some welding may be necessary Exhaust modifications may be needed
- Complete Suspension Kit: Upgraded performance for street and track.
- QA1 MOD Shocks: Fine-tune your ride height and handling for a perfect stance and performance in any driving scenario.
- Custom 9" Rear Housing: Supports up to 800HP.
- Lightweight Front Suspension: Enhances control and reduces flex.
- Easy Installation: Bolt-on with minimal welding required.
Guides & Documents
QA1 HK53-GMF2RN Specifications
QA1 HK53-GMF2RN Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | HK53-GMF2RN |
| Brand | QA1 |
| Front Coil Springs Included | Yes |
| Rear Coil Springs Included | Yes |
| Rear Leaf Springs Included | No |
| Front Shock Struts Included | Yes |
| Front Shock Type | Double adjustable coil-over |
| Rear Shock Struts Included | Yes |
| Rear Shock Type | Double adjustable coil-over |
| Front Sway Bar Included | Yes |
| Front Sway Bar Finish | Black powdercoated |
| Sway Bar Type | Hollow |
| Front Sway Bar Diameter | 1.375" |
| Rear Sway Bar Included | Yes |
| Rear Sway Bar Finish | Black powdercoated |
| Rear Sway Bar Diameter | 0.875" |
| Tie Rod Sleeves Included | Yes |
| End Link Bushings Included | Yes |
| Rear Leaf Spring Bushings Included | No |
| Sway Bar Bushings Included | Yes |
| Upper Trailing Arms Included | No |
| Lower Trailing Arms Included | No |
| Trailing Arm Mount Braces Included | No |
| Panhard Bar Included | No |
| Torque Arm Included | No |
| Upper Control Arms Included | Yes |
| Lower Control Arms Included | Yes |
| Control Arm Style | Tubular |
| Control Arm Material | Steel |
| Front Strut Tower Bar Included | No |
| K-Member Support Brace Included | No |
| Rear Strut Tower Bar Included | No |
| Subframe Connectors Included | Yes |
| Chassis Stiffener Included | No |
| Calipers Included | No |
| Rotors Included | No |
| Brake Pads Included | No |
| Brake Lines Included | No |
| Wheel Studs Included | No |
| Center Link Included | No |
| Spindles Included | No |
| Inner Tie Rod Ends Included | No |
| Outer Tie Rod Ends Included | No |
| GENERAL | |
| GTIN Code | 806990230706 |
| Sold in Quantity | Kit |
| Notes | Includes narrowed 9 in. housing. |
| Crossmember Included | No |
Ratings & Reviews
Ratings & Reviews
Questions & Answers
Questions & Answers
Be the first to ask a question.
Fitment
Fitment
1975-1981 Chevy Camaro
1975-1981 Pontiac Firebird