QA1 BAX106 Bump Steer Kit

Changing suspension components in your 1982-1992 Chevrolet Camaro and Pontiac Firebird (F-body) can sometimes cause bump steer or unwanted toe changes during suspension travel. QA1's easy-to-install Bump Steer Kit corrects this problem.

ELIMINATE BUMP STEER

Bump steer is caused by misalignment in the suspension geometry, leading the wheels to turn slightly in and out as the suspension travels up and down. These direct bolt-in kits allow users to relocate the outer tie rod end lower or higher to match the ride height and angle of the control arms through suspension articulation.

EASY BOLT-IN INSTALLATION

The included hardware and stud taper ensure an exact fit with the 3rd gen Camaro and Firebird spindle and steering linkage, making installation easy.

MADE IN THE USA

QA1 suspension is proudly made in Lakeville, Minnesota.

• Direct bolt-in design for easy installation
• Adjustable outer tie rod end to correct bump steer
• Precision fit with 3rd gen f-body spindle and steering linkage
• Proudly made in the USA