It worked fine
If you are trying to connect an aftermarket Fox body mustang or Tbird power steering rack to a saginaw style power steering pump, this is what you need. The kit converts the steering rack ports to -6AN fittings and the kit has the adapters you need to hook the hose up to a GM style saginaw pump. The instructions were lacking in details on how to install the 6AN conversion fittings in the rack. There is no mention of how to install the supplied o-rings on the adapters and two copper washers are also supplied with no details on how or where to use them. Best I can figure out you install the smaller o-ring on the pressure side adapter fitting and the larger o-ring on the return line adapter fitting. There is no specified torque value for the adapter fittings and it is difficult to determine how tight the fittings should be with the o-rings installed. Still no idea what to do with the copper washers and suspect they were supplied to use in place of the o-rings if they don't seal. The washers would make a good seal on the top of the steering rack connections if the o-ring was not in place on the fittings.
