Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump

#91032535

Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump

Name: Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump
Brand: Speedway Motors
SKU: 91032535
Price: 120.99 USD
Availability: InStock
Rating: 4.6 (94 reviews)

94 Reviews

11 Questions

Adapts an aftermarket 1982-1988 T-Bird/Cougar type rack to a GM Type 1 Saginaw pump
Pressure line has a 5/8"-18 male inverted flare fitting at the pump end
Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting.

$120.99

/set

In Stock

Quantity

Need Help? Call to Order

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

82-88 Ford Thunderbird, -6 AN, Rubber, 90 degree Angle

Adapts an aftermarket 1982-1988 T-Bird/Cougar type rack to a GM Type 1 Saginaw pump
Pressure line has a 5/8"-18 male inverted flare fitting at the pump end
Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting.
Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting.

See more details

Key Specs

MFG. Part #	91032535
Brand	Speedway Motors
AN Size	-6 AN
Material Type	Rubber

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Quick and Easy Returns

Return Policy

Speedway Motors 91032535 Details

Our standard power steering hose assemblies are an inexpensive alternative to the more costly stainless steel braided hose kits. This set adapts an aftermarket 1982-1988 T-Bird/Cougar type rack or our 91034340-POW rack to a GM style pump. Return hose will normally need to be cut to length.

The pressure line in this kit has a 5/8"-18 male inverted flare fitting at the power steering pump end along with a -6AN to an 9/16"-18 (14mm-1.5) male O-ring fitting on the rack end. Note this is an O-ring style sealing design, and not an inverted flare sealing style. It also includes an adaptor so that it can work with an O-ring style (metric) pump fitting. We suggest using power steering pump910-32908 or910-32922-FORD.

Kit includes:

Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting.
The included fittings that will install into the aftermarket 1982-1988 T-bird type rack which are 9/16"-18 (14mm-1.5) O-ring (high pressure) and 5/8"-18 (16mm-1.5) O-ring (low pressure return) with the smaller O-ring fitting hose end being the pressure side for the rack.

Charts

Instruction Sheet (PDF)

Guides & Documents

Power Steering Hoses Installation Instructions (91032535)

CA WARNING:

Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov

Speedway Motors 91032535 Specifications

KEY SPECS
MFG. Part #	91032535
Brand	Speedway Motors
AN Size	-6 AN
Material Type	Rubber

GENERAL
Sold in Quantity	Kit
Thread Pitch	9/16"-18 / 14mm-1.5 Male O-ring
Thread Pitch (2)	5/8"-18 / 16mm-1.5 Male O-ring
Angle	90 degree

Ratings & Reviews

4.6

94 Reviews

Overall Assessment

Customers discussed our product's high-quality materials and practical usability, including superb fit in many different models of cars such as Ford trucks, Mustang 2, Chevy, Saginaw pump, and T-Bird rack. Reviews highlighted the durable construction of the hoses with a few comments on the need for better-fit options for certain installations. They commended the product's successful operation and effectiveness in power steering conversions. However, several users wished for the hose kit to include clearer instructions and modifications tailored to various car models for a more streamlined setup. Customers specifically appreciated the product's superiority compared to competitors in terms of the quality of materials and fitting precision.

Write A Review

4.6

94 reviews

Most Liked Positive Review

5.0

Excellent quality

They were a perfect fit for my Thunderbird rack and mating to my newer General Motors power steering pump. The adapter bushing was included so as it would fit a newer style small General Motors power steering pump. The only negative that I could see is that some people may need the hose to be able to swivel because both of the fittings on each end of the pressure hose must stay oriented the same way because of the way it's manufactured of not having some type of swivel. And if you have an unusual circumstance there is no way to twist the hose so it wouldn't meet your requirement to fit period however for me it was not an issue

Most Liked Negative Review

3.0

does not fit my application

I have a 36 ford with gen 1 chevy engine, saginaw pump and mustang 2 rack and pinion. I bought all the parts to replace the system from speedway and this hose kit was designed to go with those parts. When I tested fitment of the hoses, the connection to the pump was facing the wrong way. I have to loop the hoses toward the front of my car due to clearance issues, If I was able to loop them to the back, it may have worked. I think it would be a good idea to list the cars these hoses have been installed in so this issue does not come up

Filter by Ratings

Sort Reviews

YES I would buy this Product Again if needed.

5.0

2 months ago

DALE

Windsor, Ontario, Canada

Verified

it took a little bit of figuring out the route. But works Great with NO Leaks......

Would Recommend

Power Steering Hose Kit

5.0

2 months ago

Garage Rookie

Perryville Arkansas

Verified

This product met my needs exactly. I needed to connect a 1986 Chevy 350 Power Steering Pump to a Mustang II Power Rack that had been installed in my '41 Chevy project car. The experts in the street-rod area nailed it, and the installation was easy - and it looks great! Thanks for your expert help throughout the years!

Would Recommend

I would buy again

5.0

4 months ago

Rat rod

Omaha ne

Verified

Worked perfect sbc to mustang 11 rack

Would Recommend

Speedway Motors is the BEST!

5.0

6 months ago

Almost Superman

Indio CA

Verified

I was able to repair power steering pump high pressure leak. Exactly what I needed!

Would Recommend

I would use this part again if needed

5.0

8 months ago

Bakersfield california

Verified

Used on mustang 2 front end on my 54 chevy pickup truck,parts were constructed very well,easy install

Would Recommend

I would buy again, if degree's were adjusted.

3.0

10 months ago

N/A

Pueblo, Co.

Verified

The pressure hose fitting that connects to the power steering pump is 90 degrees off. So I have a twist in the hose. Maybe it'll relieve when heated up at running temperature? Hopefully it doesn't split. I guess I didn't think about asking about a replacement, till this survey was sent. But if possible I would like that to happen.

Would Recommend

Great parts that fit right.

5.0

a year ago

Fiwinfool58

Stanwood , Michigan

Verified

Tha parts I research from Speedway never let me down . Fast shipping is always nice to get my projects rolling....

Would Recommend

Perfect fit!

5.0

a year ago

Arizona

Verified

Very pleased with this purchase. Everything fit properly and came with all necessary parts. 1939 Ford Coupe Deluxe, Mustang II, small block Ford.

Would Recommend

Great product

5.0

a year ago

Frankie

Beloit, Wisconsin

Verified

The hoses are good quality. They won't work for my build. Wrong angle on the solid tube. But that's to be expected on a completely custom Rat Rod build.

Would Recommend

time saver

5.0

a year ago

Barry

Hampton VA.

Verified

having this kit sure made it easier than looking for parts to go from Ford to Chevy!

Would Recommend

Load More Reviews

Showing 10 of 94 reviews

Questions & Answers

11 Questions • 12 Answers

Sort Questions

What lines will work on a 52' chevy truck with your MII bolt in kit, and t-bird power rack with an ls swap (truck accessories?

by Edward

• 9 years ago

2 answers

View Answers

I have a Heidts Mustang2 with your Tbird rack and pinion and Chevy power steering pump. Which is the high pressure connection and will these hoses fit?

by Tom

• 9 years ago

1 answer

View Answer

What is the length of the pressure side hose, and what is the instde diameter of the return hose?

by none

• 10 years ago

1 answer

View Answer

The rack I am using says the return line port is 5/8 x 18 thread size. Will the 16mm o'ring fitting in this kit work. (The pressure side is 14mm)

by Dan

• 11 years ago

1 answer

View Answer

Will this work with an LS-1 engine?

by JW

• 11 years ago

1 answer

View Answer

I am trying to put the return hose onto the barb of pump 910-32908-chr Any tips on how? With steel re-enforcing in the hose, I can't imagine it will stretch over bulb on the barb. I've warmed it up and pushed and pushed. It won't go. It is on a small block in a 29" roadster, so there's limited room. thanks

by Doba

• 11 years ago

2 answers

View Answers

what is the length of the hoses between the crimped fittings?

by cali562

• 12 years ago

1 answer

View Answer

Both adapters leak I have installed this line kit in my street rod project and both of the rack adapter fittings leak at the rack. They have the O ring and metal washer on them, but after filling with fluid they start to drip in 1-2 days. I know these need to be fully sealed before I go any further. Any suggestions? thread sealer of teflon tape? Thanks, Tim

by TM4GM

• 12 years ago

1 answer

View Answer

I installed the brass inverted flare fitting in pump but can not get hose to thread on.

by fatfennerford

• 12 years ago

1 answer

View Answer

I installed a mustang II IFS with a power rack on my 1968 mustang the rack has a 14 mm o-ring pressure and 16 mm o-ring return will this kit work I would like to use my stock pump it has a 5/8 IF

by Heath

• 13 years ago

1 answer

View Answer

Load More Questions

10 of 11 questions shown

Fitment

1982-1988 Ford Thunderbird