|
#91631
Starting from
$32.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
| MFG. Part # | Select Finish and Length |
| Thread Pitch | 5/8"-18 |
| Tube Length | 31" |
| Material Type | Steel |
| Finish | Natural |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyIf you are building a hot rod just a little bit different than the next guy, you will probably need a special length tie rod or drag link sleeve. We stock many common and uncommon lengths along with custom, made-to-order lengths. Measurements are in assembled eye-to-eye lengths.
To order:
Charts
Guides & Documents
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | Select Finish and Length to see |
| Brand | Speedway Motors |
| Thread Pitch | 5/8"-18 |
| Tube Length | 31" |
| Material Type | Steel |
| Finish | Natural |
| GENERAL | |
| Sold in Quantity | Each |
4.9
60 Reviews
Customers praised the product for its quality and practicality, frequently noting its excellent fit and function. The tie rods have been used successfully in a range of old and custom car builds, including T-buckets, roadsters and street rods. The threaded tie rod tubes were considered well-designed and a beneficial addition to their vehicles. Recurring comments emphasized the ease of installation, good finish, and sturdy build of these parts. Some clients commented that it was more cost efficient and convenient to purchase the product rather than making it themselves. Others lauded the fact that the tie rods could be ordered by tube length to suit specific applications. A few customers also appreciated the depth of the threading on the parts as this allowed for flexible adjustment if needed. The product was commonly described as a worthwhile purchase, with a great number of the reviews firmly stating they'd buy it again.
4.9
60 reviews
5
56
4
3
3
0
2
1
1
0
Most Liked Positive Review
5.0
Just what I needed!
I usually make my own parts like this one but it was a no braniner to buy this sleeve. The LH threaded tap needed to make this part is much more expensive than this sleeve. Also many of us do not have a lathe which is ideal for making these type of parts. The threads on this part are also threaded very deep (3 or more inches each end) so if you need to shorten it a bit you can without having to thread it deeper.
Most Liked Negative Review
2.0
Nothing wrong but wrong size . Too long
I had to cut 1.5 " off this sleeve and re-tap 5/8 fine thread to make it work 1 + hour of my time. Tried calling for assistance before ordering but was told the techs were too busy.not happy.
Filter by Ratings
Nothing wrong but wrong size . Too long
2.0
6 months ago
What
Spokane valley
Verified
I had to cut 1.5 " off this sleeve and re-tap 5/8 fine thread to make it work 1 + hour of my time. Tried calling for assistance before ordering but was told the techs were too busy.not happy.
Would Not Recommend
Yes. I would buy part again
5.0
8 months ago
None
Fresno California
Verified
Well made piece
Would Recommend
Exactly as described
5.0
8 months ago
Clay
Harrisville, WV
Verified
works for my older chassis with hiem joints
Would Recommend
Great product
5.0
8 months ago
Red
Arkansas
Verified
Fast shipping great customer service to help get correct length i needed
Would Recommend
Just as expected.
5.0
a year ago
Catfish
Campbellsville, KY
Verified
Fit and finish is good.
Would Recommend
It fits perfectly
5.0
a year ago
Hot rod
Petal Mississippi
Verified
It's a great drag link
Would Recommend
yes I would buy this again
5.0
a year ago
obadia harslager
Waddell az
Verified
steering system
Would Recommend
yes I would buy it again
5.0
a year ago
Ralph
MN
Verified
Drag link for my steering
Would Recommend
Great stuff
5.0
a year ago
Tony
Long Beac
Verified
Fits
I would buy this product again!
5.0
a year ago
Rod
Taylor Ridge Illinois
Verified
Fit exactly as it should along with great quality! Service was great as I called for advise and techs were extremely knowledgeable!
Would Recommend
Showing 10 of 60 reviews
4 Questions • 4 Answers
What kind of metal is the rods made out of
by Petty
• 7 years ago
1 answer
View Answer
If I order just the sleeve, without ends, do I need to order the length I need for the sleeve or add measurements for ends?
by Joshua
• 7 years ago
1 answer
View Answer
How long are the threads inside the tube on each side for the 24" length tube?
by 150operator
• 13 years ago
1 answer
View Answer
If I order the 32" finished length will I be able to adjust the rod ends out to get 32.5" eye to eye? Basically, can the rod ends be adjusted 1/4" longer on each side to give me 1/2" more length?
by chops
• 14 years ago
1 answer
View Answer
4 of 4 questions shown
