Key Specs

D-57-22
MFG. Part #92541
BrandPerTronix
CARB EO#
See more specs

Need To Know

Quick and Easy Returns

Return Policy

PerTronix 92541 Details

IGNITOR II FOR AUTO-LITE DISTRIBUTOR #IAD-4008

The Ignitor II has many of the same great feature that the Ignitor has, but its smarter. Ignitor II units sense the coil current level and use a powerful micro controller to adjust the dwell. Variable dwell helps to maintain peak energy throughout the entire RPM range.Features Ignitor II systems develop up to 4 times more energy between 3000 and 5000 RPM than standard ignition systems. High RPM performance is improved when used with the Flame-Thrower II super low resistance (0.6 ohms) 45,000 volt coil.
• Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance.
• Develops on average 4 times more available energy between 3000 and 5000 RPM, and 2 times more available plug voltage.
• Peak current level is reached just prior to spark for maximum energy without the heat build-up, increasing coil and module life.
• Adjusts spark timing at higher RPMs to compensate for the inherent electronic delay.
• Senses startup and develops more energy for quicker, easier starting. Built in reverse polarity and over current protection shuts down the system, preventing component damage.
• Legal in all 50 states and Canada (C.A.R.B. E.O. #D-57-2).
• Guaranteed for 30 months

  • PerTronix 92541 Ignitor II Adaptive Dwell Control Autolite 4 cyl IAD-4008
  • Compared to points, averages 4 times more available energy between 3000 and 5000 RPM
  • Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance
  • Develops on average 4 times more available energy between 3000 and 5000 RPM, and 2 times more available plug voltage
  • Peak current level is reached just prior to spark for maximum energy without the heat build-up, increasing coil and module life
  • Adjusts spark timing at higher RPMs to compensate for the inherent electronic delay
  • Senses startup and develops more energy for quicker, easier starting. Built in reverse polarity and over current protection shuts down the system, preventing component damage
  • Legal in all 50 states and Canada (C.A.R.B. E.O. #D-57-2)
  • PerTronix 92541 Ignitor II Adaptive Dwell Control Autolite 4 cyl IAD-4008
  • Compared to points, averages 4 times more available energy between 3000 and 5000 RPM
  • Adaptive dwell maintains peak energy throughout the entire RPM range, reducing misfires while improving engine performance
  • Develops on average 4 times more available energy between 3000 and 5000 RPM, and 2 times more available plug voltage
  • Peak current level is reached just prior to spark for maximum energy without the heat build-up, increasing coil and module life
  • Adjusts spark timing at higher RPMs to compensate for the inherent electronic delay
  • Senses startup and develops more energy for quicker, easier starting. Built in reverse polarity and over current protection shuts down the system, preventing component damage
  • Legal in all 50 states and Canada (C.A.R.B. E.O. #D-57-2)

Application

1951 Willys All models V4 (Ignitor version available in 6V negative ground, add N6 suffix, Ignitor version available in 6V positive ground, add P6 suffix, Not for use with solid core spark plug wires)
1940-59 Jeep All models V4 (Ignitor version available in 6V negative ground, add N6 suffix, Not for use with solid core spark plug wires)

Charts

Warranty Information

Click for details

Speedway Motors cannot facilitate the return of defective PerTronix products as they have requested to handle these directly with the consumer. Purchasers of a product who wish to make a warranty claim based upon an alleged product defect should email the

PerTronix 92541 Specifications

D-57-22
KEY SPECS
MFG. Part #92541
BrandPerTronix
CARB EO#
GENERAL
GTIN Code694342537791

Questions & Answers

1 Question • 1 Answer

When installing the Pertronix II 92541 in an Autolite IAD 4008 distributor do you still use the original dust cover that is under cap & the rotor covering over where the electric component points & condenser were & the pertronix sensor unit & magnetic ring are?

by Jax

• 8 years ago

1 answer

1 of 1 questions shown

Customer Impersonation Script