Painless Wiring 60511 5.0 Ford Fuel Injection System Engine Harness
Painless Wiring 60511 5.0 Ford Fuel Injection System Engine Harness
Painless Wiring

|

#91060511

Painless Wiring 60511 5.0 Ford Fuel Injection System Engine Harness

  • Specifically designed for the 1986-1995 5.0 H.O. engines
  • Features an all new fuel injection harness with OEM fitment connectors and harness breakouts
  • Has a diagnostic connector and check engine light
See More

$619.99

/each

In Stock

Order soon, only 1 left in stock!


Quantity

Need Help? Call to Order

Add to a list

Share

Select an engine to verify Fitment

Select Engine

Product Summary

Universal Fit, 8 Number of Circuits

  • Specifically designed for the 1986-1995 5.0 H.O. engines
  • Features an all new fuel injection harness with OEM fitment connectors and harness breakouts
  • Has a diagnostic connector and check engine light
  • Comes with crimp-on terminals and rubber grommets for added protection
  • Kit will allow you to install a 1986-1995 5.0 Ford fuel injected engine and computer in just about anything
See more details

Key Specs

MFG. Part #60511
BrandPainless Wiring
See more specs

Need To Know

Need help?

855.313.9176
View the Help Center

Quick and Easy Returns

Return Policy

Painless Wiring 60511 Details

If you want to put a Ford in a Ford, this is the harness for you. It allows you to install a 1986-1995 5.0 Ford fuel injected engine and computer in just about anything. Harness comes complete with factory connectors, terminals, color coded wire and plugs directly into the factory ECM. It even has enough wire to hide the computer in the trunk.

Harness does not include any emissions or automatic transmission related connections.

Application

  • 1986-1989.5 must add MAF (mass air flow) sensor
  • 1994-1995 must modify TPS wiring and change distributor

Charts

Specs

This kit includes:

  • 8 circuit
  • All new fuel injection harness with OEM fitment connectors and harness breakouts
  • Diagnostic connector and check engine light
  • Crimp-on terminals, rubber grommet
  • Mounting hardware
  • Installation manual

CARB Warning

Follow EPA, CARB, and state regulations for engine changes

Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine
CA Prop 65
CARB warning

Painless Wiring 60511 Specifications

KEY SPECS
MFG. Part #60511
BrandPainless Wiring
GENERAL
Sold in QuantityEach
GTIN Code749823605114
Number of Circuits8

Ratings & Reviews

5

1 Review

Write A Review

5

1 reviews

5

1

4

0

3

0

2

0

1

0

Filter by Ratings

Quality Harness

5.0

6 years ago

Coleman Chris

Memphis MI

Verified

I purchased this harness in order to Mass Air swap my '89 Lincoln Town Car as well as relocate the computer. It seems to be of good quality, everything is labeled, instructions were easy to follow. Well worth the cost to not have to deal with modifying a 30 year old harness.

Would Recommend

Showing 1 of 1 reviews

Questions & Answers

13 Questions • 11 Answers

Hello, I'm planning on installing a 95 5.0 into a 65 ford falcon, the car has no wiring in it right now do I need to have standard wiring harness for the falcon installed first? is this just an add on harness to switch to fuel injected?

by Caleb

• 7 years ago

1 answer

View Answer

I am planning on installing a5.0 ho in a 1963 Ford galaxie. The motor is. 30 over with an eldelbrock intake, msd distributor, and coil, 6al box. Will this product be correct, if not, what do you recommend

by RON

• 7 years ago

1 answer

View Answer

Transplanting 96 ford 302 ( distributor swap) into a 94 jeep yj. Utilizing ax15 ( jeep transmission and x-fer case) and running gear. How do you recommend overcoming the Ford Vss signal to the computer conversion? No place to install the sensor, or is there a conversion, or re-program the ECM with out the VSS signal input?

by Bill

• 7 years ago

1 answer

View Answer

Does this include instructions on how to use this wiring kit on a 1994 5.0? And what distributor do I need to find for it?

by Joe

• 8 years ago

2 answers

View Answers

do you supply the flash of the ecu/ecm if not who does that ?

by spanky

• 10 years ago

1 answer

View Answer

Hello, will this be what I am needing to swap a 1990 5.0 ho into a 1964 f250? As I have seen it will not wire up to the gauges, so is there a kit to wire up the gauges too?

by Savage

• 10 years ago

1 answer

View Answer

I'm pulling the motor and trans out of a 1989 mustang gt 5.0l ho. I will be installing it in a 1964 ford falcon. My question can I eliminate everything except fuel injection and spark? Is there a harness to install this 5.0 in a classic car?

by robert

• 10 years ago

1 answer

View Answer

Hi I am considering doing a 302 swap in a 95 ranger and want make it efi so I can pass emissions. I am wondering if I use this harness will it plug into my factory dash so my speedometer and everything work or what should I do

by fuzzy

• 10 years ago

1 answer

View Answer

Hello, My name is Marty and I have a 1990 Mustang 5.0 H.O. with EFI MAF, Is there a way to remove my harness and replace it with this doing modifications to this because I see the power supply to this harness is built in where mine I believe gets it's power through a input wire and relay currently wired from the factory. Any information to adapt this to work in my car ould be greatly appreciated. Thank's in advance, Marty.

by MAD-MARTY

• 10 years ago

1 answer

View Answer

Can i use this harness in my volvo? I have a little project on my hands right now, which is a 91 volvo 240 with a 5.0 302 swap, now the question is with this harness can I retain my stock gauges and assorted volvo electronics? This harness looks pretty detailed and I would absolutely love to buy it. Thanks, David

by Speedhybridz

• 11 years ago

1 answer

View Answer

Load More Questions

10 of 13 questions shown

Fitment

  • 5.0L Ford Small Block Windsor

  • 5.0L Ford Small Block Windsor

  • 5.0L Ford Small Block Windsor

  • 5.0L Ford Small Block Windsor

  • 5.0L Ford Small Block Windsor

  • 5.0L Ford Small Block Windsor

  • 5.0L Ford Small Block Windsor

  • 5.0L Ford Small Block Windsor

  • 5.0L Ford Small Block Windsor

  • 5.0L Ford Small Block Windsor

  • 5.0L Ford Small Block Windsor

  • 5.0L Ford Small Block Windsor

  • 5.0L Ford Small Block Windsor

  • 5.0L Ford Small Block Windsor

  • 5.0L Ford Small Block Windsor

  • 5.0L Ford Small Block Windsor

  • 5.0L Ford Small Block Windsor

  • 5.0L Ford Small Block Windsor

  • 5.0L Ford Small Block Windsor

  • 5.0L Ford Small Block Windsor

  • 5.0L Ford Small Block Windsor

  • 5.0L Ford Small Block Windsor

  • 5.0L Ford Small Block Windsor

  • 5.0L Ford Small Block Windsor

Customer Impersonation Script