-33%
-33%
|
#91005958
Discontinued
This item is currently not available
Shop all Speedway Motors Wheel Studs and Lug Nuts
Oval Track Cars, 3.000" Overall Length, Steel, Black
Need help?
855.313.9176Quick and Easy Returns
Return PolicyReplace those "pony" stock wheel studs with these "super-strength" oversized wheel studs. Overall length is 3" and 1-3/4" thread length.
Recommended drill bit size is 43/64" (0.6719") # 910-82007
Recommended Press Fit for press-in wheel stud
Tech Tip: If nearest standard drill bit is too small, you will need to use an appropriately sized reamer to enlarge the drilled hole until it is within the tolerance for the desired press fit.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91005958 |
| Brand | Speedway Motors |
| Thread Pitch | 5/8"-11 |
| GENERAL | |
| Overall Length | 3.000" |
| Knurl Diameter | 0.685" |
| Knurl Length | 0.375" |
| Thread Length | 1.740" |
| Head Diameter | 0.925" |
| Material Type | Steel |
| Finish | Black |
| Sold in Quantity | Each |
| Notes | HEAD DIA. .958 |
4.8
11 Reviews
Customers highly appreciate our product for its easy installation, perfect fit, and superior quality compared to factory studs. Users commend the product's excellent functionality in dirt track racing applications. Being a perfect upgrade for wheel studs, customers claim it offers enhanced safety standards. The product also fits snuggly in the hub, making it incredibly practical. It is described as a must-have for racing due to its positive impact on performance. It represents an ideal choice for front discs on circle track GM cars, exceeding minimum requirements of most racing bodies. Word of advice from a satisfied customer: no press is needed for installation - an old lug nut and impact wrench will suffice.
4.8
11 reviews
5
9
4
2
3
0
2
0
1
0
Filter by Ratings
Great product fast shipping!
4.0
6 years ago
Dan
Iaea
Verified
Good product work well forme.
Would Recommend
Would buy again.
5.0
7 years ago
Buster
Troy, Missouri
Verified
Needed new studes to put in dirt track race car. I think it is an overlooked stress item during the racing season.
Would Recommend
great part ex threeds
5.0
8 years ago
greatgreadpa
mid michigan
Verified
did just what threy were made for
Would Recommend
!
5.0
8 years ago
Speedy
Janesville mn
Verified
!
Would Recommend
Will buy again and again!
4.0
9 years ago
Shake n bake
Junction city ks
Verified
Cery easy to use fit snuggly in the hub as they are suppose to.
The perfect wheel stud upgrade.
5.0
9 years ago
68e
Placerville Ca
Verified
Easy to install and excellent quality. I wanted the extra safety for my Pure stock
Would Recommend
EXCELLANT
5.0
10 years ago
Ken
Amery wi
Verified
GREAT BUSINESS FAST AND ACCURATE
Would Recommend
great product
5.0
11 years ago
smith96
grayson ky
Much better then the factory studs and easy to install
Would Recommend
Item was exactly as described. Installed
5.0
12 years ago
Steve02
Lebanon,IL
Verified
The sizing is spot on, I measured my old studs and ordered the one that matched. It was a perfect fit. Installed easily.
Would Recommend
wheel studs worked good
5.0
16 years ago
mozer
lenoir ,nc
Verified
good products [...]
Would Recommend
Showing 10 of 11 reviews
1 Question • 1 Answer
1. What is the diameter of the head? 2. What is the width of the head? 3. What is the O.A.L. of wheel bolt from the head mount to end? 4. What is the Length of knurl from head? 5. What is the length from the head mount to end of threads? 6. What is the di
by
• 15 years ago
1 answer
View Answer
1 of 1 questions shown
