Product Summary

3.215" Overall Length, 0.625" Knurl Diameter

    See more details

    Key Specs

    MFG. Part #46247
    BrandMoroso
    Thread Pitch14mm x 1.5
    See more specs

    Need To Know

    Quick and Easy Returns

    Return Policy

    Moroso 46247 Details

    Wheel Studs, press-in wheel stud, 14mm x 1.5 x 3" long, 5 per package

    • 0.625" knurl dia. for recommended standard hole size 0.609" to 0.619"

    Recommended Press Fit for press-in wheel stud 

    • Steel Hub          0.006"-0.016"
    • Aluminum Hub   0.010"-0.016"

    Tech Tip:  If nearest standard drill bit is too small, you will need to use an appropriately sized reamer to enlarge the drilled hole until it is within the tolerance for the desired press fit.

    CARB Warning

    For race/ off road use only

    Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

    Moroso 46247 Specifications

    KEY SPECS
    MFG. Part #46247
    BrandMoroso
    Thread Pitch14mm x 1.5
    GENERAL
    Overall Length3.215"
    Knurl Diameter0.625"
    Knurl Length0.535"
    Thread Length2.465"
    Sold in QuantitySet
    GTIN Code084663462474

    Questions & Answers

    Customer Impersonation Script