MSD HEI Ingition Coil Conversion Kit

• Spark Energy:  135-145 mJ per spark 
• Primary Voltage:  520-540 Volts 
• Secondary Voltage:  45,000 Volts 
• Spark Series Duration:  20 degree Crankshaft Rotation 
• RPM Range:  15,000 RPM with 14.4 Volts 
• Voltage Required:  12-15 Volts, 7 Volt Start 
• Current Draw:  .7 Amp per 1,000 RPM 
• Weight and Size:  1.7 lbs., 8"L x 4"W x 1.825"H

COIL

Don’t let the compact size of the Blaster SS Coil fool you, because it is packed with performance! The efficient E-core windings are designed to produce high amounts of current without sacrificing the voltage output. In fact, when used with an MSD 6 Series Ignition, the Blaster SS produces 300 milliamps with a maximum voltage output of 40,000 volts! The secondary windings are wound on a segmented bobbin which reduces the chance of voltage breakdown between the primary and secondary windings. For more protection, these windings are encased in a polyurethane compound for complete protection against vibration. The Blaster SS features brass terminals and a sturdy Rynite housing. It is supplied with a 90° boot, terminal and vibration mounts. A great addition to CD Ignitions and some stock applications.

• Improved output coil for electronic ignitions, and MSD Ignitions
• Efficient winding design and assembly creates a compact housing
• Primary and secondary windings are encased in Ciba polyurethane
• 70:1 turns ratio and lower primary resistance produce high voltage output
• Dupont Rynite housing with a tall tower and brass primary terminals

HEI COIL CAP

The modified HEI Dust Cover allows you to remove the stock HEI coil in your distributor cap, and replace it with an externally mounted coil such as the Blaster 2. Designed to be installed on stock HEI distributor caps with no modification.

COIL WIRE

 

18 long, 90° terminals and boots are installed on both sides to connect to an HEI style terminal. A Power Tower is also supplied to adapt a socket style cap.

• Coil Wire, Super Conductor