MSD 8202 Blaster 2 Ignition Coil

If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD ignition, the Blaster Coil line is the right choice. Special 100:1 windings, kept cool in an oil filled metal canister, are used to provide maximum build-up of voltage.  The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. Can be used with a stock ignition, Blaster Ignition, or MSD 5, 6 or 7 Ignition Control.

For use with stock or MSD electronic ignitions. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.  Mallory Unilite applications also require the ballast resistor.

• Improved output coil for stock points or electronic ignitions, Blaster Ignition, or MSD 5, 6, and 7 Series (ballast resistor required for points)
• 100:1 turns ratio and lower primary resistance produce high voltage output
• MSD Red metal canister is filled with a premium grade oil for cooling
• CARB E.O. Approved

MSD Ignition Installation Instructions (PDF)

• Turns ratio:  100:1  
• Primary resistance:  .7 OHMs  
• Secondary resistance:  4.5K OHMs  
• Inductance:  8 mH  
• Maximum voltage:  45,000 Volts  
• Peak current:  140 mA  
• Spark duration:  350 uS