-22%

Long 28 Spline 9 Inch New Ford Cut-to-Fit Axle

-22%

#UP235054

Long 28 Spline 9 Inch New Ford Cut-to-Fit Axle

Incomplete
Item is missing one or more components. Please review the photos and description section for details on what is included
9 Inch Ford

$141.99

/each

In Stock

$182.99

Save $41.00

Order soon, only 2 left in stock!

Item is missing one or more components. Please review the photos and description section for details on what is included.

Quantity

Need Help? Call to Order

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

Incomplete
Item is missing one or more components. Please review the photos and description section for details on what is included
9 Inch Ford
28 or 31 spline axle
Long or Short
Axle has the new style big bearing ends on it

See more details

Key Specs

Garage Sale Type	Incomplete
Axle Type	Semi-Floating
Overall Length	33"
Spline Count	28
Material Type	1541H Alloy Steel

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Ineligible for Return

Contains items that cannot be returned

Installation Details

Installation Tips

Long:
- 33" length with 9 1/4" of spline
Short:
- 29.51" length with 8" of spline

Installation Notes:

Disc brake kits may require increasing the i/d of the center hole in the rotor to match the o/d register or hub pilot on the axle flange, or reducing the diameter of the register or hub pilot on the axle to fit properly to the i/d of the rotor.

When installing new axles in rearends with posi traction differentials, be sure to install the driver's side axle first to keep the splines properly aligned. Failure to do so may move the two splined gears out of alignment, and it may be difficult to install the driver's side axle properly if the passenger side axle is already installed.

If installation of passenger side axle is done first it may require two people when installing the driver's side axle, with both parties rotating reach axle until splines are in line and the driver's side axle fully sides into the housing.

When cutting axles to desired lengths, it is recommended that the following procedures are performed:

Normal steel cutting machinery (cold saw, band saw, chop saw, etc.)
Using a sleeve around the axle such as a small piece of PVC tubing - this allows:
- The axle to be spun in place while being cut
- A perimeter cut around the outer diameter assisting in keeping the cut square
- Avoiding the build-up of too much heat by doing a straight cut (like a knife though a stick of butter)

To ensure you get the most out of your new 9 Inch components, it is recommended that you perform a proper break-in process:

Use a name brand mineral-based gear oil, preferably 85w140 (Extremely high quality synthetic oils may be used once break-in process has been successfully performed)
Place vehicle on jack stands and let the rearend spin while the vehicle idles - run transmission in both forward and reverse periodically throughout the process
Continue to run the rearend until the pinion gets hot (place hand on bottom of the differential housing to verify this)
Proper break-in allows:
- The ability to install new axles and hit the track the same day without worry
- Extended life for rearend components
- Keeps the quality and life of your gear oil

Have a Question?

Call one of our U.S.-based customer service professionals.

Tech Support - Opens at NaNpm (UTC)

Speedway Motors UP235054 Details

Garage Sale Product

This is Garage Sale priced due to the item missing 1 or more components. Please review the photos for what you are purchasing. MISSING BEARING AS IT WAS CUT IN HALF.

NO WARRANTY, NO RETURNS ON GARAGE SALE ITEMS

These steel axle shafts have a natural finish and are sold individually. They are perfect for small shops and will allow you to build your own custom width rear end easily. Axle length is measured from the flange to the end of the splines. Be sure to select your choice length; short or long, and either 28 or 31 spline.

Circle track / off road application 5/8" thread wheel studs sold separately 910-05957 and 910-05958
Street application 1/2" thread wheel studs sold separately 910-05959 and 545-46190
9 Inch Ford
28 or 31 spline axle
Long or Short
Axle has the new style big bearing ends on it
Bearing measures 3.150"
Bearings already pressed in
2-1/2" Offset
Drilled for 5 on 4-1/2", 5 on 4-3/4" & 5 on 5" wheel bolt patterns using 0.685" knurl dia.
Axles have 3 patterns 5 on 4 1/2", 4 3/4", and 5"
PA20 set bearing
AR375 Torino retainer
Axle length is from the flange to the end of the splines
Axles sold each, not as a pair
The hub pilot (center of the axle flange) measures 2.781"
The O.D. of the axle flange measures 5.93"

For more information on determining the proper axle length and the Ford 9 Inch, be sure to check out our tech articles; How to Measure and ID Differential Housings and The Rearend Debate: Ford vs. Chevy.

CA Prop 65

Speedway Motors UP235054 Specifications

KEY SPECS
MFG. Part #	UP235054
Brand	Speedway Motors
Garage Sale Type	Incomplete
Axle Type	Semi-Floating
Overall Length	33"
Spline Count	28
Material Type	1541H Alloy Steel

GENERAL
Position	Rear
Bolt Pattern	Multi: 5 on 5" \| 4.75" \| 4.50"
Housing End Style	Big Ford/New Style (Torino)
Wheel Studs Included	No
Spline Length	9.25"
Finish	Natural
Sold in Quantity	Each
Offset	2.50"
Stud Diameter	0.68"
Notes	Wheel studs not included. Sold separately. See suggested sku #s below.
Cut to Fit	Yes

Ratings & Reviews

Be the first to write a review.

Questions & Answers

Be the first to ask a question.