|
#91032442
Hot Rod Nostalgia Steering Column, 30 Inch, Polished Stainless Steel
- This Nostalgia steering column offers art deco styling without the need for an unsightly clamp on turn signal switch
- Integrated GM style turn signal switch with features a self-canceling mechanism and brings modern convenience to your hot rod
- GM column wiring plug works perfectly with many of the universal wiring harnesses that we offer utilizing the same column plug
$413.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Universal Fit, Universal Mount Type, Dash Key Location
- This Nostalgia steering column offers art deco styling without the need for an unsightly clamp on turn signal switch
- Integrated GM style turn signal switch with features a self-canceling mechanism and brings modern convenience to your hot rod
- GM column wiring plug works perfectly with many of the universal wiring harnesses that we offer utilizing the same column plug
- Polished stainless steel finish is perfect for show cars or daily drivers
- Accepts 69-94 GM steering wheels or steering wheel adapters
Key Specs
| MFG. Part # | 91032442 |
| Mount Type | Universal |
| Column Type | Straight |
| Shifter Location | Floor |
| Key Location | Dash |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 91032442 Details
Speedway Motors 91032442 Details
Our original Hot Rod Steering Column has been a huge success, but many rodders said they wanted one with a turn signal.
The Nostalgia Columns offer a similar vintage look but have modern GM-style turn signal, hazard light and horn functions built into the attractive bell-shaped upper housings.
Perfect for a wide variety of 1920's through 1950's era rods, as well as Cobras and other kit cars.
The columns measure 30" long and have 3/4"-36 spline lower shafts. They're available with polished or paintable stainless steel housings.
- Fits 1969-1994 GM type steering wheel or steering wheel adapter
- Fits Grant Wheel with Adapter for 1969-1994 GM Steering Wheel
- 30" long
- Beautiful Art-Deco styling
- Polished Stainless steel
- Turn signal, hazard light and horn functions
Note: This column will not work with Speedway 9 bolt steering wheel adapters. This column will work with Billet Specialties adapters.
Application
- Fits 1969-1994 GM Steering Weel
- Fits Grant Wheel with Adapter for 1969-1994 GM Steering Wheel
- Overall length from end of lower splined shaft to upper end of housing around turn signal assembly is 30"
- This shaft extends past housing approximately 1-5/8"
- End of shaft for steering wheel or adapter is 11/16" x 36 spline
- Main housing is 1-3/4" O.D.
- Housing at top for turn signal is 4" in diameter and 2-5/16" tall or deep
- Wire loom exits main column is 5-1/8" below the turn signal housing
- Wire loom is approximately 23" long and has the GM style flat plug installed
- Wire loom has 8 wires for horn, turn signal and flashers
- Lower end of shaft is 3/4" x 36 spline
Comes with stainless turn signal lever and flasher button, horn wire pigtail and spring.
Specs
- Overall length from end of lower splined shaft to upper end of housing around turn signal assembly is 30"
- This shaft extends past housing approximately 1-5/8"
- End of shaft for steering wheel or adapter is 11/16" x 36 spline
- Main housing is 1-3/4" O.D.
- Housing at top for turn signal is 4" in diameter and 2-5/16" tall or deep
- Wire loom exits main column is 5-1/8" below the turn signal housing
- Wire loom is approximately 23" long and has the GM style flat plug installed
- Wire loom has 8 wires for horn, turn signal and flashers
- Lower end of shaft is 3/4" x 36 spline
Comes with stainless turn signal lever and flasher button, horn wire pigtail and spring.
Speedway Motors 91032442 Specifications
Speedway Motors 91032442 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 91032442 |
| Brand | Speedway Motors |
| Mount Type | Universal |
| Column Type | Straight |
| Shifter Location | Floor |
| Key Location | Dash |
| Overall Length | 30" |
| Finish | Polished |
| Output Shaft Type | 3/4" 36-spline |
| Tube O.D. | 1.75" |
| Material Type | Stainless Steel |
| Collapsible | No |
| Spline Count | 36 |
| Spline OD | 0.75" |
| GENERAL | |
| Sold in Quantity | Each |
Ratings & Reviews
4.5
16 Reviews
Customers appreciate our 30" polished stainless steel steering column for its high-quality build, traditional style, and perfect fit for classic Ford vehicles. It stands out for its integral turn signal and hazard flasher switch, which adds functionality and usability. Some customers had to make some necessary adaptations due to factors like the wire exit position and turn signal collar alignment, but despite this, they acknowledged the superior material quality and finish of the column. While a few noted it as slightly pricey, the low sale price was deemed manageable. Overall, its excellent polish/finish, simple installation, and compatibility with various Ford models make it a recommended purchase for those preserving or customizing classic vehicles. Negative aspects mentioned are considered minor and manageable by most.
Ratings & Reviews
4.5
16 Reviews
Customers appreciate our 30" polished stainless steel steering column for its high-quality build, traditional style, and perfect fit for classic Ford vehicles. It stands out for its integral turn signal and hazard flasher switch, which adds functionality and usability. Some customers had to make some necessary adaptations due to factors like the wire exit position and turn signal collar alignment, but despite this, they acknowledged the superior material quality and finish of the column. While a few noted it as slightly pricey, the low sale price was deemed manageable. Overall, its excellent polish/finish, simple installation, and compatibility with various Ford models make it a recommended purchase for those preserving or customizing classic vehicles. Negative aspects mentioned are considered minor and manageable by most.
4.5
16 reviews
5
9
4
6
3
1
2
0
1
0
Most Liked Positive Review
4.0
Adjustments needed for install, but a top quality column
The column was fine, though I may have been recommended the wrong adapter.I posted a question and got: "Nostalgia column 91032442 takes the 69-94 adapter such as number 4103196 and will work with steering wheel 91032748 or 410502 which comes with a horn button. Steering wheel 91032748 does not come with a horn button and you will need to get 4105894 horn button to complete installation. The adapter works with any of our 3 bolt steering wheels and if the steering wheel calls for a different adapter number then it is specific to that steering wheel." The first steering wheel mentioned is the one I got, and the hole for the horn wire through the wheel had to be drilled out to fit. The adapter casting did not have a hole in the proper place for this either and had to be drilled, but as it was white metal, it was not a big problem. Don't expect a strictly bolt together operation. I can't imagine a better final result, as all of the parts and the wheel were of the finest quality. The horn button works great too. The wheel did come with a horn button, so now I have an extra. I couldn't see the point of the horn button retainer recommended for the steering wheel that I used either..
Most Liked Negative Review
3.0
I would think twice about this product again.
The finish is great. However when trying to install the steering wheel the bell at the top of the column was way crooked. After pressing it as straight as we could, ended up putting in a lathe and cut the top straight. This required using a spacer to reduce the gap between column and wheel.
Filter by Ratings
Yes
5.0
3 months ago
Rankstank
Black hawk
Verified
I haven't installed yet but it looks to be a nice product.
Would Recommend
Wiring harness
4.0
a year ago
Man A Tee
Panama city Fl
Verified
The wiring harness for the steering column comes out the middle of the steering column top of the steering column between the steering wheel and firewall, there's no way to hide the wires, the steering harness should come out at the bottom of the steering column so the wires could be hidden, this is a bad design, other than this, it's a nice steering column
Would Not Recommend
30" polished stainless steel steering column
5.0
3 years ago
Poklmn
Milwaukee, WI
Verified
Along with the 15" '40 Ford steering wheel, also sold by Speedway and the '40 Ford steering drop by Lime Works, it's the perfect set up for a '40 Ford. Turn signal switch and hazard flasher switch integral with the column.
Would Recommend
I would buy this product again.
5.0
4 years ago
Gary
Ontario, Canada
Verified
Works perfect in my '32 Ford 5W project. Love the tradition style.
Would Recommend
I don't think I would buy this product again
4.0
5 years ago
.Old Red
PG UT
The turn signal cancel cam unit that came with the column had a horn wire tube that was 1 1/2" long. it did not work with the Grant three bolt adaptor and wheel I also purchased. I needed to purchase a stock GM unit with a tube about 5/8" long in order to attach the steering wheel.
Would Not Recommend
Too pricey to buy again.
4.0
5 years ago
Chris
Ontario, Canada
Verified
Over priced but sale price manageable
Would Recommend
I would buy this product again if it came with all the parts
5.0
5 years ago
Kiwibucketeer
New Zealand
Verified
Disappointed that it came without a few pieces....but all sorted now by customer service
I would buy this again
5.0
6 years ago
Red
PG UT
Verified
great product for the cost
Would Recommend
Very nice product
4.0
6 years ago
David Ruhs
Des Moines ia
Verified
Very nice fit and finish, will work out well at my 32 Ford
Nice Column
5.0
7 years ago
Ol Skqql
King of Prussia
Verified
This column fit perfectly in my 40 Ford Coupe The small diameter tube gave me the extra space I needed. The polish/finish is excellent.
Would Recommend
Showing 10 of 16 reviews
Questions & Answers
11 Questions • 15 Answers
Questions & Answers
11 Questions • 15 Answers
can this column be shortened I need it to be about 3 inches shorter
by mack
• 8 years ago
3 answers
View Answers
what adapter do i need for steering column #910-32442 and steering wheel #910-32750
by mack
• 8 years ago
3 answers
View Answers
I was wondering what it would take to install this into a 47 dodge pickup. As far as adapters and mounts. It with be going custom anyways. I was only curious if you could tell me the go to easiest way for this part in this truck.
by Clint
• 9 years ago
1 answer
View Answer
will this work for mt 53 chevy pickup? will my original steering wheel fit and look nice?
by Mick
• 10 years ago
1 answer
View Answer
Hey Cobra Builds. What mount, adaptor and or wheel has worked? I have the column and need to go forward. Anyone have a code to the wire harness? I am finishing a MK-2 and need some insight so I only order once! Thanks
by Harv
• 10 years ago
1 answer
View Answer
What adapter kit do I order to get a functioning horn button and mount steering wheel #910-32748, or, alternatively, steering wheel #410-502? Kindly specify what other steering wheels you offer that work with this adapter.
by Bob
• 10 years ago
1 answer
View Answer
Will this fit 910-32715? (40 ford steering Wheel)
by Tony
• 10 years ago
1 answer
View Answer
Will this Column work on a 1954 Ford Customline?
by John
• 10 years ago
1 answer
View Answer
Does it have self cancelling flashers?
by 55truckguy
• 11 years ago
2 answers
View Answers
For a Grant wheel #410-502 to fit on this column #910-32442, what adapter kit?
by BKFab
• 12 years ago
1 answer
View Answer
10 of 11 questions shown