$113 Off
$113 Off
|
#425082951
Holley 0-82951 950 CFM Street HP Carburetor
Discontinued
This item is currently not available
Shop all Carburetors
Key Specs
| Carburetor Barrels | 4-Barrel |
| Fuel Type | Gasoline |
| Choke Type | No Choke |
| CFM Range | 900-999 CFM |
| CFM | 950 CFM |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicyHolley 0-82951 Details
Holley 0-82951 Details
The Street HP uses the best features from Holley's race Bred 4150 HP carbs, but tamed for street and light competition use. The Street HP features the contoured main body from the 4150 HP and has a tumble polished shiny finish and screw in air bleeds for precision tuning capabilities. The metering system includes a timed spark port for a vacuum advance distributor and is calibrated for a hot street/strip engine setup for outstanding throttle response and drivability. A street HP base plate is used so there are plenty of vacuum ports for power brakes, PCV, etc. The Street HP takes all the great features from the race HP and the Double Pumper and combines them into the perfect street/strip carburetor.
- Vibratory polished for good looks
- Optimized street/strip calibration for outstanding throttle response and drivability
- Contoured venturri inlet offers balanced airflow for increased horsepower
- Screw in air bleeds for precision tuning capabilities
- Four corner idle for precise idle control
- Mechanical secondaries for awesome tire turning performance
- Dual accelerator pumps for additional fuel under initial acceleration
- Dual feed fuel inlets for constant high volume fuel delivery
- Ford A/T kickdown
- Intended for lightweight vehicles w/ manual trans or automatics with high stall & low gearing
- 100% wet-flow tested by Holley technicians to assure it arrives ready to run!
Charts
Guides & Documents
CARB Warning
For race/ off road use or for use on pre-1966 vehicles.
CARB Warning
For race/ off road use or for use on pre-1966 vehicles.
Holley 0-82951 Specifications
Holley 0-82951 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 0-82951 |
| Brand | Holley |
| Carburetor Barrels | 4-Barrel |
| Fuel Type | Gasoline |
| Choke Type | No Choke |
| CFM Range | 900-999 CFM |
| CFM | 950 CFM |
| Carburetor Flange Type | 4-Barrel Square Bore |
| Finish | Shiny |
| Material Type | Aluminum |
| Secondary Type | Mechanical |
| Fuel Inlet Type | Dual |
| New or Remanufactured | New |
| Supercharged Application | No |
| GENERAL | |
| Model | 4150HP |
| Booster | Down Leg |
| Emission Code | 3 |
| Throttle Bore | 1.750 inch |
| Venturi Diameter | 1.563 Inch |
| Bolt Hole Pattern | 5.160" x 5.625" |
| GTIN Code | 090127664599 |
| Sold in Quantity | Each |
Ratings & Reviews
Ratings & Reviews
Questions & Answers
Questions & Answers
Be the first to ask a question.
