|
#9109587
$54.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
700R4, 20.00" Overall Width, 6.50" Overall Height
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThese chrome-plated flexplate/flywheel covers are for 1982 and newer GM 700-R4, 4L60 and 4L60E automatic overdrive transmissions. They are stock replacement torque converter inspection covers.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 9109587 |
| Brand | Speedway Motors |
| GENERAL | |
| Overall Width | 20.00" |
| Overall Height | 6.50" |
| Depth | 7.00" |
| Material Thickness | .07" |
| Material Type | Steel |
| Finish | Chrome |
| Sold in Quantity | Each |
| Notes | Measurement of existing cover recommended. See Notes section below. |
4.2
48 Reviews
The product, a Chrome Flexplate Dust Cover, receives a mix of positive and negative reviews. Many customers appreciate its compatibility, particularly with 700R4s. There are observations of a 'factory-perfect' fit and easy installation, while some customers found necessary modifications. Many praise the high-quality and positive aesthetics of the chrome finish, though some customers found it dull or of low quality. Certain people voiced issues with flywheel rubbing or improper fitting. Despite few negatives, most customers recommend it due to overall quality and a great price. The customer's choice for this product is largely influenced by its usability, material quality, and safety.
4.2
48 reviews
5
31
4
7
3
2
2
5
1
3
Most Liked Positive Review
4.0
It Fit......with modification
This was the only flexplate cover I could find that said it would fit a 4L60E transmission. I was using this in a 95 C4 Corvette, so that transmission may be different than other cars. 3 of the 4 holes lined up perfectly, but the 4th hole on the transmission did not line up with any of the cover at all. I was also unable to get the cover up into place without trimming some excess material from it. One of the areas that had to come off was the mounting tab that did not match any of the holes. I was able to cut it off, then weld it back on about 2" lower, then all matched up and I was able to install it. It is much heavier than the original cover and should work out well.
Most Liked Negative Review
2.0
Can be modified to fit.
The description should include "can be modified to fit a 700 r4 transmission." The slots for the bolts are too narrow and the small ones do not even line up with the bolt holes.
Filter by Ratings
I would buy this product again. Looked great and fit!!
5.0
a year ago
John
DeKalb, tx
Verified
This was the third one of these I purchased. It is the only one that fit. Worked great and bolted right on.
Would Recommend
I would buy again
5.0
2 years ago
Nolacajun
Waveland Mississippi
Verified
Great quality and easy to install
Would Recommend
I would buy this product again
5.0
2 years ago
Mick
Mishawaka, IN.
Verified
The torque converter cover was used as specified on a 700R4 transmission application and fit as described.
Would Recommend
I would buy this product again
5.0
2 years ago
dave
North Dakota
Verified
good fit
Would Recommend
I would buy from this company again
5.0
2 years ago
Street rod man
Southwest Missouri
Verified
Great product
Would Recommend
This shield fit great with no modifications on my 700R4
5.0
4 years ago
The Machine
Newport, VT
Verified
Shield was installed on my 57 BelAir that is equipped with a stroked 383 and 700R4. Mount holes lined up well (4). Flywheel clearance was a little close but no contact. Have put 2 tanks of fuel in the car since install. Very happy.
Would Recommend
I would recommend
5.0
5 years ago
Collis
Mooresville in
Verified
👍🏻
Excellent product
4.0
6 years ago
The macho stud
San Diego
Verified
Had to modify but it worked.
Would Recommend
Top Quality Chrome Flywheel
5.0
6 years ago
Sam with the Showing Scalp Flat Top
Knoxville, Tennessee
Verified
I wish all of the parts I buy were as nice as this.
Would Recommend
I was very HAPPY with the quality
5.0
7 years ago
Sure step
Keokuk ia
Verified
Fit was factory perfect
Would Recommend
Showing 10 of 48 reviews
12 Questions • 13 Answers
Will this fit a 94-96 chevy caprice lt1 4l60e ?
by Chris
• 9 years ago
3 answers
View Answers
Will it fits a 4L70E
by Jørgen
• 9 years ago
2 answers
View Answers
what size bolts do i need to put the cover on? my 85 suburban was missing those also
by Sebastian
• 9 years ago
1 answer
View Answer
Will this fit a 1995 Camaro with 3.4L/4L60E trans? The 3.4L's 4L60E has a different bolt pattern on the bell housing from the LT1's 4L60E. Bottom half might be the same, but not sure.
by Monty
• 9 years ago
1 answer
View Answer
Will this fit my 1994 chevy s10 is a manual transmission.
by omar
• 11 years ago
1 answer
View Answer
Will this fit my GM Crate 350RamJet with a 700R4 I have a street rod with a crate performance engine (GM 350/350 RamJet ) with a 700R4 trans. Will this work for my application?
by 1935Nash
• 12 years ago
1 answer
View Answer
Will it bolt up to my Chevy Small Block with a 2 speed Bushore Powerglide
by rookie22r
• 12 years ago
1 answer
View Answer
will this fit a 1990 PONTIAC FIREBIRD 3.1L AUTO TRANSMISSION
by SCOTTYDUCTATI
• 12 years ago
1 answer
View Answer
will this fit a 1988 suburban 4x4 700r4
by jc88
• 12 years ago
1 answer
View Answer
WHAT SIZE OF BOLT HOLDS THIS TO TRANNY?
by TIM57
• 13 years ago
1 answer
View Answer
10 of 12 questions shown
