Product Summary

Universal Fit, 0.5" Overall Thickness, Phenolic Wood

    See more details

    Key Specs

    MFG. Part #8724
    Carburetor Flange Type4-Barrel Square Bore
    Overall Thickness0.5"
    Material TypePhenolic Wood
    FinishNatural
    See more specs

    Need To Know

    Quick and Easy Returns

    Return Policy

    Edelbrock 8724 Details

    Use open spacers where more plenum volume or more carb-to-plenum floor distance is required. 4-hole spacers enhance low-rpm torque and throttle response and dampen reversion effects on the carb. The superior heat insulating properties of wood fiber laminate are ideal for reducing heat transfer to the carb.
    • Provides Superior Heat Insulation
    • Ideal Roar Reducing Heat Transfer To Carburetor
    • More Plenum Volume
    • More Carb-To-Plenum Floor Distance

    CARB Warning

    For race/ off road use or for use on pre-1966 vehicles.

    Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway, or if installed in vehicles model-year 1965 or older; motorcycles model-year 1977 or older; or off-highway recreational vehicles (such as off-road motorcycles and all-terrain vehicles) model-year 1996 and older. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

    Edelbrock 8724 Specifications

    KEY SPECS
    MFG. Part #8724
    BrandEdelbrock
    Carburetor Flange Type4-Barrel Square Bore
    Overall Thickness0.5"
    Material TypePhenolic Wood
    FinishNatural
    GENERAL
    Carburetor Spacer StyleOpen
    Sold in QuantityEach
    Bolt Hole Pattern5.160" x 5.625"
    Gasket(s) IncludedYes
    Hardware IncludedYes
    GTIN Code085347087242

    Ratings & Reviews

    5

    4 Reviews

    Overall Assessment

    Customers highly recommend this product for its effective heat moderation, preventing overheating issues and improving acceleration in vehicles like the 1978 Corvette. The product has proven to be a practical solution to tackle vapor lock, making it ideal for all engines. Installation is straightforward and comes with all essentials such as gaskets and mounting studs. Additionally, it enhances the functionality of endurashine-coated intakes, insulating the carburetor for improved fuel delivery. This product outperforms similar, non-branded alternatives on the market and is considered well-worth the investment.

    5

    4 reviews

    5

    4

    4

    0

    3

    0

    2

    0

    1

    0

    Filter by Ratings

    Prevents heat transfer!

    5.0

    2 years ago

    RT

    Fort Worth, TX

    Verified

    Does a great job of keeping heat away from the carburetor!

    Would Recommend

    Would recommend and buy this product again!

    5.0

    5 years ago

    gt350bp

    Daytona Beach area

    Verified

    Used it on a friends 1978 slightly modified Corvette that was experiencing problems when it got hot. The isolator helped reduce the temperature of the fuel in the carb and fixed the stumble under acceleration on hot startup!

    Would Recommend

    Cured my vapor lock

    5.0

    5 years ago

    Brian

    New Mexico

    Verified

    It was easy to install, came with two gaskets and longer mounting studs. It helped me to run ethanol blended gasoline without vapor lock in the mountains. Well worth the money.

    Would Recommend

    A must for all engines

    5.0

    8 years ago

    Steve

    Woodstock ga

    Verified

    This is a must for all carbs. Stops vapor lock on all carbs. If you have a powder coated intake (endurashine) they won't dissipate heat. This will insulate the carb and help stop fuel delivery problems. Kit comes with everything (studs - gaskets- nuts -plate ) best price better than no-name

    Would Recommend

    Showing 4 of 4 reviews

    Questions & Answers

    Customer Impersonation Script