Product Summary

Assembled Cylinder Head Style, Aluminum, Natural

  • This cylinder head includes adjustable rocker stud and guide plate set-up for use with small-block Chevy style adjustable 1.6:1 ratio rockers.
  • The large 68cc combustion chambers produce 9.2:1 compression ratio with stock pistons.
  • Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed.
  • This cylinder head delivers great throttle response and power from 1500 to 6500 rpm.
  • They also feature the highest quality intake and exhaust valves and valve springs.
See more details

Key Specs

Cylinder Head StyleAssembled
Material TypeAluminum
FinishNatural
Combustion Chamber Volume68cc
Intake Runner Volume215cc
See more specs

Need To Know

Quick and Easy Returns

Return Policy

Edelbrock 60049 Details

The Edelbrock #60049 Performer RPM Super Stock cylinder head is designed for 400, 430 and 455 c.i.d. Buick engines.

  • This cylinder head includes adjustable rocker stud and guide plate set-up for use with small-block Chevy style adjustable 1.6:1 ratio rockers.
  • The large 68cc combustion chambers produce 9.2:1 compression ratio with stock pistons.
  • Performer RPM head is perfect for street performance, daily drivers, street rods and muscle cars where seat-of-the-pants performance is needed.
  • This cylinder head delivers great throttle response and power from 1500 to 6500 rpm.
  • They also feature the highest quality intake and exhaust valves and valve springs.
  • For use on pre-pollution controlled vehicles only.

Charts

CARB Warning

Follow EPA, CARB, and state regulations for engine changes

Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine

Edelbrock 60049 Specifications

KEY SPECS
MFG. Part #60049
BrandEdelbrock
Cylinder Head StyleAssembled
Material TypeAluminum
FinishNatural
Combustion Chamber Volume68cc
Intake Runner Volume215cc
GENERAL
Exhaust Runner Volume130cc
Combustion Chamber Volume Range60cc - 69cc
Intake Runner Volume Range210cc - 219cc
Exhaust Runner Volume Range130cc - 139cc
CNC-Machined RunnersNo
CNC-Machined Combustion ChamberNo
Intake Port ShapeRectangle
Intake Port LocationStandard
Exhaust Port ShapeRectangle
Exhaust Port LocationStandard
Intake Valve Diameter2.12"
Intake Valves IncludedYes
Intake Valve Angle15 °
Exhaust Valve Diameter1.75"
Exhaust Valves IncludedYes
Valve Spring IncludedYes
Spring Diameter1.55"
Damper Spring IncludedYes
Number of Springs Per ValveSingle
Maximum Lift0.6"
Machined for O-RingNo
Valve Seat Machine Style3-angle
Valve Seats MachinedYes
Valve Seat MaterialDuctile Iron
Valve Stem Seals IncludedYes
Valve Stem Seal TypePositive Stop
Valve Guides IncludedYes
Valve Guide MaterialManganese Bronze
Locks IncludedYes
Lock Style7 Degree
Retainers IncludedYes
Retainer MaterialSteel
Guideplates IncludedYes
Guideplate Pushrod Size0.375"
Rocker Arms IncludedNo
Rocker Arm Studs IncludedYes
Rocker Arm Nuts IncludedNo
Oiling StyleThrough Pushrod
Heat CrossoverNo
Steam Holes DrilledNo
Accessory Bolt Holes DrilledYes
Valve Cover Mounting StylePerimeter Bolt
NotesHigh-quality stainless steel valves, Intake and exhaust runners are hand blended in the bowl area and the intake entries and exhaust exits are cnc profiled for increased air-flow. These heads include adjustable rocker stud and guide plate set-up for use with small-block Chevy 1.6:1 style adjustable rockers.
Sold in QuantityEach
GTIN Code085347600496

Questions & Answers

Fitment

  • Buick 455

  • Buick 455

  • Buick 430

  • Buick 455

  • Buick 455

  • Buick 400

  • Buick 400

  • Buick 455

  • Buick 430

  • Buick 455

  • Buick 400

  • Buick 455

  • Buick 455

  • Buick 455

  • Buick 430

  • Buick 455

  • Buick 400

  • Buick 455

  • Buick 400

  • Buick 455

  • Buick 400

  • Buick 455

  • Buick 430

  • Buick 455

Customer Impersonation Script