|
#3255486
Edelbrock 5486 Performer Buick 3.8L, 4.1L V6 Intake Manifold
- Edelbrock part #5486 Performer Buick V6 intake manifold is designed for 1979 and later street 231/252 c.i.d. (252 c.i.d. 1980-84 only) Buick V6 engines with late-model cylinder heads.
- Manifold will not fit pre-1979 engines.
- Manifold not equipped with EGR.
$401.95
/each
Factory Shipped
Quantity
Need Help? Call to Order
Add to a list
Share
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Dual Plane Intake Manifold Type, Idle-5,500 RPM Range
- Edelbrock part #5486 Performer Buick V6 intake manifold is designed for 1979 and later street 231/252 c.i.d. (252 c.i.d. 1980-84 only) Buick V6 engines with late-model cylinder heads.
- Manifold will not fit pre-1979 engines.
- Manifold not equipped with EGR.
- Not compatible with C-3 and C-4 electronic fuel management systems.
Key Specs
| MFG. Part # | 5486 |
| Brand | Edelbrock |
| Intake Manifold Type | Dual Plane |
| RPM Range | Idle-5,500 |
| Material Type | Aluminum |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicyEdelbrock 5486 Details
Edelbrock 5486 Details
Edelbrock Performer GM V6 Engines Intake Manifold
- Edelbrock part #5486 Performer Buick V6 intake manifold is designed for 1979 and later street 231/252 c.i.d. (252 c.i.d. 1980-84 only) Buick V6 engines with late-model cylinder heads.
- Manifold will not fit pre-1979 engines.
- Manifold not equipped with EGR.
- Not compatible with C-3 and C-4 electronic fuel management systems.
Guides & Documents
CARB Warning
Follow EPA, CARB, and state regulations for engine changes
CARB Warning
Follow EPA, CARB, and state regulations for engine changes
Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine
Edelbrock 5486 Specifications
Edelbrock 5486 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 5486 |
| Brand | Edelbrock |
| Intake Manifold Type | Dual Plane |
| RPM Range | Idle-5,500 |
| Material Type | Aluminum |
| GENERAL | |
| Finish | Natural |
| EGR | No |
| Intake Section Included | Complete |
| Overall Height | 5.06" |
| Sold in Quantity | Each |
| Notes | Please see the charts and guides tab for a comparison of square bore vs spread bore. |
| GTIN Code | 085347054862 |
Ratings & Reviews
Ratings & Reviews
Questions & Answers
Questions & Answers
Be the first to ask a question.

