Designed for 1986 and earlier 262-400 cubic-inch Chevys. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. With that the Edelbrock Performer EPS intake manifold has a runner design that's "tuned" for peak torque at 3500 rpm on a 350-inch engine making it ideal for power from off-idle to 5500 rpm.

Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the power increases averaged 5+ ft-lbs. of torque for more performance where you need it most.

Edelbrock Performer EPS Intake Manifold
For 1955-1986 262-400 Small-Block Chevrolet V8
Accepts a 4150-Style Square-Bore Carburetor
Non-EGR.
Available in both Black and Chrome Plasma finish

CARB Warning

For race/ off road use or for use on pre-1966 vehicles.

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway, or if installed in vehicles model-year 1965 or older; motorcycles model-year 1977 or older; or off-highway recreational vehicles (such as off-road motorcycles and all-terrain vehicles) model-year 1996 and older. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

CA WARNING:

Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov

CARB warning

Specifications

KEY SPECS
MFG. Part #	Select Finish and Color to see
Brand	Edelbrock
Intake Manifold Type	Dual Plane
Carburetor Flange Type	4-Barrel Square Bore
RPM Range	Idle-5,500
Material Type	Aluminum

GENERAL
Finish	Chrome
Color	Select Finish and Color to see
EGR	No
Sold in Quantity	Each
GTIN Code	Select Finish and Color to see

Ratings & Reviews

Be the first to write a review.

Questions & Answers

1 Question • 1 Answer

Sort Questions

Hello will this manifold fit a 68 vette with a 327 and a stock hood / no hood scoop

by Fernie

• 6 months ago

1 answer

View Answer

1 of 1 questions shown