Product Summary

Carbureted Fuel System Type, One Carburetor Quantity

    See more details

    Key Specs

    MFG. Part #2519
    Intake Manifold TypeDual Plane
    Carburetor Flange TypeDual: Square and Spread Bore
    RPM RangeIdle-5,500
    Material TypeAluminum
    See more specs

    Need To Know

    Quick and Easy Returns

    Return Policy

    Edelbrock 2519 Details

    Edelbrock has developed an intake manifold for 4.3L V6 Chevy engines that is ready to handle the rigors of marine applications. A brass lines water crossover and inserts help to protect the aluminum from corrosion due to salt or fresh water. It features a carburetor flange that accepts square bore or spread bore carburetors. This Performer Vortec Marine intake manifold is designed to deliver maximum power and a broad torque curve for high-performance marine applications. Similar to the stock intake manifold, it includes a provision for 1/2 pipe water fittings on the front water crossover and 3/8 pipe horizontal vacuum fittings in the rear. This does not have a provision for an exhaust crossover, so an electric choke is required.

    • For 1996-present Chevrolet 4.3L V6 engines
    • Marine applications
    • Brass inserts to protect from corrosion
    • Sold each

    Charts

    CARB Warning

    Follow EPA, CARB, and state regulations for engine changes

    Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine

    Edelbrock 2519 Specifications

    KEY SPECS
    MFG. Part #2519
    BrandEdelbrock
    Intake Manifold TypeDual Plane
    Carburetor Flange TypeDual: Square and Spread Bore
    RPM RangeIdle-5,500
    Material TypeAluminum
    GENERAL
    Fuel System TypeCarbureted
    Carburetor QuantityOne
    FinishNatural
    EGRNo
    Intake Section IncludedComplete
    Gaskets IncludedNo
    Overall Height4.02"
    Sold in QuantityEach
    NotesDesigned for Marine use only. No provisions for exhaust-heated chokes.
    GTIN Code085347025190

    Questions & Answers

    Fitment

    • Gen 1 LB1 90-Degree Chevy

    • Gen 1 LB1 90-Degree Chevy

    • Gen 1 LB1 90-Degree Chevy

    • Gen 1 LB1 90-Degree Chevy

    • Gen 1 LB1 90-Degree Chevy

    • Gen 1 LB1 90-Degree Chevy

    • Gen 1 LB1 90-Degree Chevy

    • Gen 1 LB1 90-Degree Chevy

    • Gen 1 LB1 90-Degree Chevy

    • Gen 1 LB1 90-Degree Chevy

    • Gen 1 LB1 90-Degree Chevy

    • Gen 1 LB1 90-Degree Chevy

    • Gen 1 LB1 90-Degree Chevy

    • Gen 1 LB1 90-Degree Chevy

    • Gen 1 LB1 90-Degree Chevy

    • Gen 1 LB1 90-Degree Chevy

    • Gen 1 LB1 90-Degree Chevy

    Customer Impersonation Script