Dual Feed 1 Inch Master Cylinder w/Deluxe Bleeding Kit

Make things a little easier when installing your new caster cylinder with an added bench bleeding kit!

 

Master Cylinder

Dual feed master cylinder with 2 bolt flange style mount. Use with Speedway brake pedal assemblies. This cylinder is similar to those used on mid-70's Fords (Mustang, Fairlane/LTD, etc. with disc front/drum rear).

• Works well in disc/disc or disc/drum brake setups
• Mounting Bolt Holes:  3/8" or 10mm 
• 7 1/4" long without the pushrod, add 2" for the pushrod
• 3" wide from the outside of the reservoir to the edge of the outlets
• Mounting flange is 4" wide
• Master cylinder is also 3-7/16" tall without a cap
• Included push rod is threaded 3/8"-24 (fine thread).
• If you need a yoke for the pedal hook-up, use this Forged Steel Yoke.
• Pushrod boot included.

Uses 3/8"-24 female inverted flare outlets. If plumbing with AN 3 lines, you will need two each of these AN to IFM Adapters.

Learn more about selecting the proper master cylinder for your vehicle by reading our tech article. Brake System Selection. 

 

Brake Bleeding Kit

Dorman’s Brake Master Cylinder Bleeding Tool offers a one-stop, time-saving solution for all master cylinder bleeding jobs. It’s conveniently available in varied metric and standard sizes.

• Contains hose, clips, and differently sized fittings
• Easy to use
• Reusable for multiple jobs
• Constructed from high-quality materials for long-lasting durability
• Bleeder Adapters Included
• Bleeder Tubing Included
• Plastic Material

Kit Includes:

• (2) 22" Hoses
• (2) Clips
• M8-1.25 fitting
• M10-1.25 fitting
• M10-1.0 fitting
• M11-1.5 fitting
• M12-1.0 fitting
• 3/8"-24 fitting
• 7/16"-24 fitting
• 1/2"-20 fitting
• 9/16"-18 fitting
• 9/16"-20 fitting

 

Master Cylinder Brake Lines

This is a pair of steel or stainless steel brake lines intended to simplify plumbing from the master cylinder to a proportioning block, such as our 910-31358 or 835-26011179.

• Features tight 90° bends at the master cylinder end
• Both ends of both lines are 3/8"-24 inverted flare nuts
• The longer of the two lines measures app. 12" from the bend to the end

 

Kit Includes

(1) Speedway Dual Feed Brake Master Cylinder, 1 Inch Bore, Disc/Drum

(1) Dorman 13911 Deluxe Brake Master Cylinder Bench Bleeder Kit

(1) IFF Brass Union Coupler, 3/8 Inch-24 IFF to 3/8 Inch-24

(1) Dual Outlet Master Cylinder Steel Dual Brake Line Kit