Key Specs

MFG. Part #
Rod Journal Diameter1.888"
Bearing ConstructionTri-metal
Bearing Undersize
Narrowed Bearing
See more specs

Need To Know

Quick and Easy Returns

Return Policy

Details

Clevite's H-Series was developed primarily for use in NASCAR type racing, but they are suitable for all types of competition engines. These sets are specifically for S/B Chevy V-8 using a crankshaft with 1.88" Honda rod journals.

  • H-Series bearings should be used if contact patterns obtained with P-series parts are too narrow. Contact pattern should ideally cover 2/3 to 3/4 of the bearing surface.
  • The X001 option gives you .001" oil clearance
  • If you aren't sure which type of performance bearing to start with, the H-Series will be your best choice.

Charts

CARB Warning

For race/ off road use or for use on pre-1966 vehicles.

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway, or if installed in vehicles model-year 1965 or older; motorcycles model-year 1977 or older; or off-highway recreational vehicles (such as off-road motorcycles and all-terrain vehicles) model-year 1996 and older. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

Specifications

KEY SPECS
MFG. Part #
BrandClevite
Rod Journal Diameter1.888"
Bearing ConstructionTri-metal
Bearing Undersize
Narrowed Bearing
GENERAL
Sold in QuantitySet
NotesSet of (8).

Questions & Answers

1 Question • 1 Answer

does this item require a different crank or rods other than oem items?

by nafum

• 11 years ago

1 answer

1 of 1 questions shown

Customer Impersonation Script