Product Summary

4.0L, Hydraulic Flat Tappet Camshaft Type

    Key Specs

    MFG. Part #SK68-232-4
    BrandCOMP Cams
    Camshaft TypeHydraulic Flat Tappet
    Intake Duration (.050" Lift)206
    Exhaust Duration (.050" Lift)212

    Need To Know

    This Product Will Ship Free

    Shipping Policies & FAQs

    Quick and Easy Returns

    Return Policy

    COMP Cams SK68-232-4 Details

    SK68-232-4 - Camshaft Kit, A6 X4 250H-13.

    AMC 199-258 c.i. 6 CYL. 1964-1997. Hydraulic-Great Torque and Smooth idle for fuel injected. Xtreme 4x4 Hydraulic Flat Tappet Camshafts for fuel injected. All COMP Cams Camshafts are manufactured to the strictest tolerances. Rigorously tested and checked for quality.

    • Improved throttle response & increased low & mid-range RPM horsepower for towing & off-road
    • Designed for use with common restrictive factory exhaust systems, including OEM exhaust manifolds


    1987-98 Jeep 242

    CARB Warning

    For race/ off road use only

    Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

    COMP Cams SK68-232-4 Specifications

    MFG. Part #SK68-232-4
    BrandCOMP Cams
    Camshaft TypeHydraulic Flat Tappet
    Intake Duration (.050" Lift)206
    Exhaust Duration (.050" Lift)212
    Speedway Motors Catalog Part #282-SK682324
    Intake Duration250
    Exhaust Duration256
    RPM Range800 to 4800
    Lobe Separation113 °
    GTIN Code036584082972
    Grind NumberA6 X4 250H-13
    Intake Valve Lift w/ Rocker Arm Ratio0.46"
    Exhaust Valve Lift w/ Rocker Arm Ratio0.476"
    External Ignition Box RequiredYes
    Valve Springs RequiredYes
    Valve Spring IncludedNo
    Lifter TypeHydraulic Flat Tappet
    Lifters IncludedYes
    Retainers IncludedNo
    Locks IncludedNo
    Valve Stem Seals IncludedNo
    Timing Chain and Gears IncludedYes
    Assembly Lubricant IncludedYes
    Pushrods Included
    Rocker Arms IncludedNo
    Gaskets IncludedNo
    Sold in QuantityKit