Menu

Shop

Garage

Cart

Account

Product Summary

5.7, 6.1, Hydraulic Roller Tappet Camshaft Type

    Key Specs

    Camshaft TypeHydraulic Roller Tappet
    RPM Range1500-5800
    Intake Duration (.050" Lift)216
    Exhaust Duration (.050" Lift)220
    Lobe Separation113 °

    Need To Know

    This Product Will Ship Free

    Shipping Policies & FAQs

    Quick and Easy Returns

    Return Policy

    COMP Cams 112-501-11 Details

    COMP Cams Xtreme Fuel Injection XFI268HR-13 Hydraulic Roller Camshaft for Dodge 5.7L & 6.1L Hemi.

    Xtreme Fuel Injection (XFI) Hydraulic Roller Camshafts. Hydraulic Roller-Noticeable idle, will work with stock computer in most applications, strong midrange. All COMP Cams Camshafts are manufactured to the strictest tolerances. Rigorously tested and checked for quality.

    • Newest & quickest lobe profiles in the Xtreme family; provide a terrific increase in performance
    • Tuned for use in EFI applications where extra air flow signal through the carburetor is not required (feature wider lobe separation without loss of responsiveness)
    • Work well with aftermarket cylinder heads & feature high lift

    CARB Warning

    For race/ off road use only

    Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

    COMP Cams 112-501-11 Specifications

    KEY SPECS
    MFG. Part #112-501-11
    BrandCOMP Cams
    Camshaft TypeHydraulic Roller Tappet
    RPM Range1500-5800
    Intake Duration (.050" Lift)216
    Exhaust Duration (.050" Lift)220
    Lobe Separation113 °
    GENERAL
    Intake Valve Lift w/ Rocker Arm Ratio0.528"
    Exhaust Valve Lift w/ Rocker Arm Ratio0.531"
    Intake Duration268
    Exhaust Duration272
    Sold in QuantityEach
    Grind Number268H-13
    GTIN Code036584115595
    External Ignition Box RequiredYes
    Valve Springs RequiredYes