• PS CB: Valve Bowls Blended• PS MI: Match Intake Port to FP 1204 (IK 180) Match Intake Port to FP 1206 (IK 200, IK 215) Match Intake Port to FP 1205 (BP IK 210)• PS Valve Job: Competition Valve Job
• Intake Valves: 2.020 x 4.920 o.a.l. – BR 6170DI (IK 180, IK 200) 2.080 x 4.965 o.a.l. – BR 81019 (IK 215, BP IK 210)
• Exhaust Valves: 1.600 x 4.920 o.a.l. – BR 6169DI (IK 180, IK 200) 1.600 x 4.965 o.a.l. – BR 81021 (IK 215, BP IK 210)
• Valve Springs: 1.250 Hydraulic Valve Spring – CC 981, 100 lb Closed, 300 lb Open, 1.850 Installed Height, .525 Maximum Lift (IK 180, IK 200)
1.470 Hydraulic Roller Valve Spring – CC 987, 125 lb Closed, 325 lb Open, 1.900 Installed Height, .575 Maximum Lift (IK 180, IK 200)
1.550 Flat Tappet Valve Spring – BT 120121, 150 lb Closed, 365 lb Open, 1.950 Installed Height, .600 Maximum Lift (IK 215, BP IK 210)
1.550 Roller Valve Spring – PAC 1941, 255 lb Closed, 610 lb Open, 1.950 Installed Height, .700 Maximum Lift (IK 215, BP IK 210)
• Retainers: 1.250 7° Steel – CC 742 (IK 180, IK 200) 1.430 7° Steel – CC 743 (IK 180, IK 200) 1.550 10° Steel – CC 752 (IK 215, BP IK 210)
• Valve Locks: 7° – PI PF – 555 (IK 180, IK 200) 10° – Jumbo – CC 611 (IK 215, BP IK 210)
• Rocker Studs: 3/8 – BR 318S (IK 180, IK 200) 7/16 – BR 716L, AR RSS-4I (IK 215, BP IK 210)
• Guide Plates: 5/16 – CC 4808
• Valve Seals: 11/32 – US VS529V
|
• Torque Heads: 70 ft-lb• Torque Rocker Studs: 40-45 ft-lb• Intake Gaskets: FEL-PRO 1204, COMETIC C5416 (IK 180) FEL-PRO 1206, COMETIC C5414 (IK 200, IK 215) FEL-PRO 1205 (BP IK 210)
• Head Gaskets: 350 – FEL-PRO 1003, COMETIC C5399 400 – FEL-PRO 1004, COMETIC C5403
• Exhaust Gaskets: FEL-PRO 1404, COMETIC C5415 (IK 180, IK 200) FEL-PRO 1406, COMETIC C5415 (IK 215, BP IK 210)
• Head Bolts: ARP 134-3601, MANLEY 42313
• Head Bolt Washers: MANLEY 42102
• Head Studs: ARP 134-4001 (6pt)
• Accessory Bolt Holes Are Drilled
• Spark Plug Starting Points: CHAMPION RN12YC or AUTOLITE 3924 for Pump Gas NGK R5671A-8 for Racing Gas
• Intake Valve Seats: DBP 2.131 5/16
• Exhaust Valve Seats: DBP 1.650 3/8
• Intake and Exhaust Valve Guides: SMG 545 11/32 CM
• Spring Pockets: May Not be Cut Any Larger or Deeper Than 1.550
• Valve Angle: 23°
• Angle Milling: .0078 in per cc
• Flat Milling: .0060 in per cc
• Angle Machining: Not Available
• Dowel Shift: Not Available
• Pushrod Slots: Standard
• Stud Girdle: BR 6435
• Rocker Arms: Standard
• Lifters: Standard
• Valve Centerline: Standard
• Intake Manifold: HP-1 / HV 1016 (IK 180) HV 1014 / HV 1016 (IK 200 , IK 210, IK 215) BM 1000 (IK 215)
|