|
#91028354
$103.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
5 on 5.5" Bolt Pattern, 7.00" Outside Diameter, Natural
| MFG. Part # | 91028354 |
| Bolt Pattern | 5 on 5.5" |
| Outside Diameter | 7.00" |
| Material Type | Aluminum |
| Finish | Natural |
Need help?
855.313.9176Quick and Easy Returns
Return PolicyThese aluminum adapter wheel spacers allow to put 1928-35 early Ford style wire wheels on newer style brake set-ups. They securely bolt to your existing pattern.
CA WARNING:
Can expose you to lead, a carcinogen and reproductive toxicant. See www.P65Warnings.ca.gov
| KEY SPECS | |
|---|---|
| MFG. Part # | 91028354 |
| Brand | Speedway Motors |
| Bolt Pattern | 5 on 5.5" |
| Outside Diameter | 7.00" |
| Material Type | Aluminum |
| Finish | Natural |
| GENERAL | |
| Inside Diameter | 3.13" |
| Overall Thickness | 1.50" |
| Thread Pitch | 1/2"-20 |
| Bolt Hole Pattern | 5 on 5.5" |
| Hole Diameter | 3.13" |
| Thread Length | 1.00" |
| Sold in Quantity | Each |
4.3
10 Reviews
Customers appreciate the product for its exact sizing, good quality, and perfect fit. Its compatibility with 35 Ford wire wheels has been highlighted, adding to its practicality. However, some customers needed to modify the product for it to fit certain models, a factor prospective buyers should take into consideration. Despite this, the product is recognized for being well-made and finely machined. Though it's noted it doesn't come with lug nuts, the product's overall performance and reliability are well-received by customers.
4.3
10 reviews
5
6
4
2
3
1
2
1
1
0
Most Liked Positive Review
4.0
Quality spacer / adapter
A well-made piece but we were using it as a spacer on the back of a Ford truck rear and the sender was not cut out large enough for the hub . A little bit of simple machining fix the problem and it works great, but I would recommend checking the hub size before you buy it to make sure it fits if you don't have a way to machine iit.
Most Liked Negative Review
2.0
Buyer Beware
This adapter was specified by Speedway to mate 35 Ford wire wheels to their 5 on 5 early Ford disc brake kit. They do not fit as supplied. I had to machine the inside diameter of the adapter to fit the Ford truck rotor that is supplied with the brake kit. I also tried the wheel adapter on a 40 Ford drum/hub; it was closer, but did not fit that either. If you buy this product, expect additional work to use it. Overall quality is good, just made to fit an unknown something that I don't own.
Filter by Ratings
Perfect spacers.
5.0
5 months ago
Paul
Cub Run Kentucky
Verified
I put 1940 brake drums on my 35 Ford. These spacers worked perfect to remount the wire wheels. I did have to replace the wheel studs in the hub with longer ones which was no big deal. These are high quality products.
Would Recommend
Great product with exact sizing for what was needed. Thanks
5.0
6 years ago
Old-school Paul.
05641
Verified
Bolted right on as advertised.
Would Recommend
Love this product.
5.0
7 years ago
Lk
Memphis TN
Verified
Works very well with 35 ford wire wheels.
Would Recommend
Great Product!
5.0
7 years ago
Ron
Mt. Clemens, MI
Verified
Exactly what I needed!
Would Recommend
Yes
5.0
8 years ago
Mike
Helotes Tx
Verified
Good quality and perfect fit
Would Recommend
Buyer Beware
2.0
8 years ago
Chuck Elderton
San Jose, CA
Verified
This adapter was specified by Speedway to mate 35 Ford wire wheels to their 5 on 5 early Ford disc brake kit. They do not fit as supplied. I had to machine the inside diameter of the adapter to fit the Ford truck rotor that is supplied with the brake kit. I also tried the wheel adapter on a 40 Ford drum/hub; it was closer, but did not fit that either. If you buy this product, expect additional work to use it. Overall quality is good, just made to fit an unknown something that I don't own.
yes
4.0
9 years ago
miller
wichita ks
Verified
fit real good
Would Recommend
Perfect fit.
5.0
9 years ago
Old school '30
Perrysburg Ohio
Verified
Nice part that is machined well. Just thought for the price it would come with lug nuts. Everyone else's adapters come with lug nuts. I know there cheap, just another thing I have to go get.
Would Recommend
Great customer service
3.0
10 years ago
Chris
Sonoma county
Verified
The only reason i am giving it 3 stars is because speedways customer service was great. This part didnt fit on the brake kit that the tech ordered to go with the wheel spacer so i had to machine it.
Would Not Recommend
Quality spacer / adapter
4.0
10 years ago
Timmay
Woodbury, NJ
Verified
A well-made piece but we were using it as a spacer on the back of a Ford truck rear and the sender was not cut out large enough for the hub . A little bit of simple machining fix the problem and it works great, but I would recommend checking the hub size before you buy it to make sure it fits if you don't have a way to machine iit.
Would Recommend
Showing 10 of 10 reviews
10 Questions • 14 Answers
Your listing gives 5 on 5-1/2 for both bolt and hole patterns. Is this a typo? If not, there is no "adapting" provided by this part. I need an adapter to put 5 on 5-1/2 wire wheels on a trailer with 5 on 4-1/2 hubs. Do you have adapters for this application? Thanks, Mike.
by Mike
• 7 years ago
1 answer
View Answer
I have 16" Ford wires that I am looking to mount to F100 hubs and flat faced brake drums. - spacers are needed to allow this brake swap to work with wire wheels. Will these spacers/adapters space out the wire wheel sufficiently and and also support the wire wheel properly? I noted they are machined with a step near the center bore, I assume this is to support the wire wheel properly? If this is the case, would it be correct to assume that the usual additional wire wheel supports are not then required? Please advise as I need the correct parts the 1st time..... thanks !
by Frankie
• 7 years ago
1 answer
View Answer
I have a pair of 21in ford wire wheels on a 57 chevy truck rear axle and drums re drilled and ran with long studs at 5on5.5 could i use this as a spacer rather than adapter? My studs are plenty long enough i just need a center spacer peice to reach out behind the wheel to support the center of the wires on the flat drums , looking for a one peice deal rather then buying spacers then the top adapter ring was hoping this would work
by Lane
• 8 years ago
3 answers
View Answers
Will these fit on a 1960 Ford F100 5x5.5 front axle. Looking if it will fit on the drum or is the inside hole to small thanks.
by Indycoyite
• 9 years ago
1 answer
View Answer
Will these spacers allow me to bolt a set of 35 ford wire wheels on to a 1966 Ford Bronco 9" rear axle housing?
by Ryan
• 9 years ago
3 answers
View Answers
Hi, can you recommend what wheel nuts to use to attach the adaptor to the drum?
by Gaz
• 9 years ago
1 answer
View Answer
Hi do you need to use the support ring part #910-65470 to center the wheel with these adapters ?
by bogie
• 10 years ago
1 answer
View Answer
Will this adapter allow me to install my 19" Ford wire wheels on your disc brake kit for early Ford spindles (#91031909)?
by Gnordsman
• 10 years ago
1 answer
View Answer
What is the thickness at the wheel not including the lip or flang? What is the width or depth of the support lip? Over all says 1.50 Just want to know the space filled. 11/2" or 1" or what have you? Again not including the lip
by WEhh
• 11 years ago
1 answer
View Answer
Is this a 5 on 4.5 adaptor to an early ford 5 on 5.5 wire wheel? What I don't see in the discription is the starting lug pattern. I'm putting a modern brake system drop I-beam front end on a 33 Ford Model B and what to use my existing 17 inch rim with a 5 on 5.5 inch bolt patern on a disk brake set up that has a 5 on 4.5 inch patern. What are my options?
by Squiddy
• 11 years ago
1 answer
View Answer
10 of 10 questions shown
1932-1935 Ford 1/2 Ton Pickup
1932 Ford Model 18
1933-1934 Ford Model 40
1934 Ford Model 40 A
1933 Ford Model 46
1935 Ford Model 48
1935 Ford Model 50
1928-1931 Ford Model A
1932 Ford Model B
1928-1935 Ford Sedan Delivery
