$275 Shipping

ATK HP80 Ford 347 Stroker Base Engine 410HP with Front Sump Pan

$275 Shipping

ATK HP80 Ford 347 Stroker Base Engine 410HP with Front Sump Pan
ATK Engines

|

#35020212

ATK HP80 Ford 347 Stroker Base Engine 410HP with Front Sump Pan

  • Block: Seasoned 6.0L Iron Gen IV
  • Bore/Stroke: 4.030” x 4.000”
  • Displacement (cu.in): 408
See More

Level Of Dress:

#1 Base Engine

#3 Complete Dress - Carburetor#4 Complete Dress - EFI#2 Mid Dress

$6,361.00

/each

Factory Shipped


Quantity

Need Help? Call to Order

Add to a list

Share

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

Long Block Crate Engine Type, 10.1:1 Compression Ratio

  • Block: Seasoned 6.0L Iron Gen IV
  • Bore/Stroke: 4.030” x 4.000”
  • Displacement (cu.in): 408
  • Crankshaft: Manley 4340 forged 58 tooth reluctor wheel
  • Rods: Manley 4340 forged H beam 6.125” ARP 8740 bolts
See more details

Key Specs

Crate Engine TypeLong Block
Compression Ratio10.1:1
Engine Displacement347 cu. in.
Camshaft TypeHydraulic Roller
Cylinder Head MaterialAluminum
See more specs

Need To Know

Made to Order

This custom item will ship when completed

Truck Shipment

Truck shipments must be pre-paid with a credit card, certified check or money order

Need help?

855.313.9176
View the Help Center

Quick and Easy Returns

Return Policy

ATK Engines HP80 Details

Engine Specifications:

  • HP: 415
  • TQ: 430
  • Block: Seasoned OE Roller Block 1987-1995
  • Bore/Stroke: 4.040 x 3.400
  • Displacement: 347CI
  • Crankshaft: Scat nodular iron external balance 28oz
  • Rods: Scat 4340 forged I beam with ARP 8740 bolts
  • Pistons: Forged 10:1 compression
  • Rings: Moly
  • Camshaft: Hyd. Roller
  • Cam Specs: 220/224 @50 .512in/.512ex 112LSA
  • Timing Chain: Double roller
  • Cylinder Heads: Dart aluminum 58cc/170cc 2.02/1.60
  • Rocker Arms: Aluminum 1.6 roller rockers
  • Oil Pan: Front sump
  • Oil Pump: Melling high volume
  • Balancer: External balance 28oz (with Scat kit)
  • Flexplate/Flywheel: External balance 28oz 164 tooth (with Scat kit)

    • Recommended Components:

  • Intake Manifold: Edelbrock performer RPM #7121
  • Carburetor: Quick Fuel 680CFM vacuum secondary’s electric choke #HR-680cfm
  • Fuel Pump: Holley Mechanical 110GPH #12-289-11 or Factory Electric if installed in 1987-1995 Mustang
  • Distributor: Pro Billet RTR (with upgraded melonite or steel gear)
  • Spark Plugs: Autolite #3923
  • Spark Plug Wires: 8mm
  • Water Pump: Per application

    • Engine Info:

  • Oil: Conventional / Non Synthetic 10W30
  • Oil Filter: Wix or K and N
  • Timing: 34-36 Degrees
  • Spark Plug Gap: .035”
  • Firing Order: 13726548
  • Octane: 91+
  • Stall Converter: 2400-2800
  • Exhaust: 1 5/8

    • Disclaimer: The parts listed are ATK’s recommendations of parts to be used to obtain our power figures listed. Power figures can vary based on parts used by the end user. It is the customer’s responsibility to verify components will work in their application. Some modifications to the vehicle may be required using these and or other aftermarket parts. . ATK reserves the right to substitute parts used in engines if necessary.

    CARB Warning

    Follow EPA, CARB, and state regulations for engine changes

    Emissions warning: this part is for vehicle engine changes, not direct oem engine replacements. In California, engine changes are legal when done in compliance with California bureau of automotive repairs (bar) engine change policy. For assistance, call bar referee at: (800) 622-7733. And see https://bar.Ca.Gov/consumer/smog_check_program/engine_changes. All customers must comply with federal epa mobile source enforcement memorandum no. 1a (and addendum) and all applicable state regulations when conducting engine changes. Improper installation and/or use of this part in California may subject the installer and/or owner to a $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and laws of all states for use of this engine change part on makes or models of vehicles that render them noncompliant with applicable state and/or federal emission laws with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine
    CA Prop 65
    CARB warning

    ATK Engines HP80 Specifications

    KEY SPECS
    MFG. Part #HP80
    BrandATK Engines
    Crate Engine TypeLong Block
    Compression Ratio10.1:1
    Engine Displacement347 cu. in.
    Camshaft TypeHydraulic Roller
    Cylinder Head MaterialAluminum
    Piston MaterialForged Aluminum
    Carburetor IncludedNo
    Intake Manifold IncludedNo
    Distributor IncludedNo
    Valve Covers IncludedYes
    Cylinder Heads IncludedYes
    Throttle Body IncludedNo
    Timing Cover IncludedYes
    Oil Pan IncludedYes
    Water Pump IncludedYes
    Harmonic Balancer IncludedNo
    Flexplate IncludedNo
    Flywheel IncludedNo
    Air Cleaner IncludedNo
    Spark Plugs IncludedNo
    Spark Plug Wires IncludedNo
    Computer IncludedNo
    Wiring Harness IncludedNo
    GENERAL
    Combustion Chamber Volume58cc
    Bore x Stroke (in)4.060" x 3.000"
    Material TypeIron
    GTIN Code00653517225765
    NotesIncludes front sump style oil pan and pickup tube.
    Sold in QuantityEach

    Questions & Answers

    Be the first to ask a question.

    Customer Impersonation Script