9 Inch Ford Cut-to-Fit Axles w/Bearings, Big Ford & 1/2" Studs

#9100827

9 Inch Ford Cut-to-Fit Axles w/Bearings, Big Ford & 1/2" Studs

Name: 9 Inch Ford Cut-to-Fit Axles w/Bearings, Big Ford & 1/2" Studs
Brand: Speedway Motors
SKU: 9100827
Price: 372.99 USD
Availability: InStock
Rating: 5 (13 reviews)

13 Reviews

1 Question

9 Inch Ford
28 or 31 spline axle
Long or Short

$372.99

/pair

In Stock

$380.47

Save $7.48

Quantity

Need Help? Call to Order

Add to a list

Select a vehicle to verify Fitment

Select Vehicle

Product Summary

Ford 9 Inch, Semi-Floating Axle Type, 1541H Alloy Steel

9 Inch Ford
28 or 31 spline axle
Long or Short
Axle has the new style big bearing ends on it
Studs have a 1/2"-20 RH thread pitch with a .685 knurl

Comes as a Kit

View Kit Components

See more details

Key Specs

MFG. Part #	9100827
Brand	Speedway Motors
Axle Type	Semi-Floating
Material Type	1541H Alloy Steel

See more specs

Need To Know

Need help?

855.313.9176

View the Help Center

Quick and Easy Returns

Return Policy

Installation Details

Installation Tips

Long:
- 33" length with 9 1/4" of spline
Short:
- 29.51" length with 8" of spline

Installation Notes:

Disc brake kits may require increasing the i/d of the center hole in the rotor to match the o/d register or hub pilot on the axle flange, or reducing the diameter of the register or hub pilot on the axle to fit properly to the i/d of the rotor.

When installing new axles in rearends with posi traction differentials, be sure to install the driver's side axle first to keep the splines properly aligned. Failure to do so may move the two splined gears out of alignment, and it may be difficult to install the driver's side axle properly if the passenger side axle is already installed.

If installation of passenger side axle is done first it may require two people when installing the driver's side axle, with both parties rotating reach axle until splines are in line and the driver's side axle fully sides into the housing.

When cutting axles to desired lengths, it is recommended that the following procedures are performed:

Normal steel cutting machinery (cold saw, band saw, chop saw, etc.)
Using a sleeve around the axle such as a small piece of PVC tubing - this allows:
- The axle to be spun in place while being cut
- A perimeter cut around the outer diameter assisting in keeping the cut square
- Avoiding the build-up of too much heat by doing a straight cut (like a knife though a stick of butter)

To ensure you get the most out of your new 9 Inch components, it is recommended that you perform a proper break-in process:

Use a name brand mineral-based gear oil, preferably 85w140 (Extremely high quality synthetic oils may be used once break-in process has been successfully performed)
Place vehicle on jack stands and let the rearend spin while the vehicle idles - run transmission in both forward and reverse periodically throughout the process
Continue to run the rearend until the pinion gets hot (place hand on bottom of the differential housing to verify this)
Proper break-in allows:
- The ability to install new axles and hit the track the same day without worry
- Extended life for rearend components
- Keeps the quality and life of your gear oil

Have a Question?

Call one of our U.S.-based customer service professionals.

Tech Support - Opens at NaNpm (UTC)

Speedway Motors 9100827 Details

Axle Shafts (2)

These steel axle shafts have a natural finish. They are perfect for small shops and will allow you to build your own custom width rear end easily. Axle length is measured from the flange to the end of the splines. Be sure to select your choice length; short or long, and either 28 or 31 spline.

Circle track / off road application 5/8" thread wheel studs sold separately 910-05957 and 910-05958
Street application 1/2" thread wheel studs sold separately 910-05959 and 545-46190
9 Inch Ford
28 or 31 spline axle
Long or Short
Axle has the new style big bearing ends on it
Bearing measures 3.150"
Bearings already pressed in
2-1/2" Offset
Drilled for 5 on 4-1/2", 5 on 4-3/4" wheel bolt patterns using 0.685" knurl dia.
Axles have 3 patterns 5 on 4 1/2", 4 3/4", and 5"
PA20 set bearing
AR375 Torino retainer
Axle length is from the flange to the end of the splines
The hub pilot (center of the axle flange) measures 2.781"
The O.D. of the axle flange measures 5.93"

For more information on determining the proper axle length and the Ford 9 Inch, be sure to check out our tech articles; How to Measure and ID Differential Housings and The Rearend Debate: Ford vs. Chevy.

Studs

These press-in wheel studs from Dorman Products Inc. are engineered to quality standards. The design ensures that your wheels will be tight at all times.

Corrosion resistant
Direct replacement for a proper fit
1/2"-20 RH thread w/ .685 Knurl
1.9" long
Serrated Stud
Box of 10
Steel Construction

Speedway Motors 9100827 Specifications

KEY SPECS
MFG. Part #	9100827
Brand	Speedway Motors
Axle Type	Semi-Floating
Material Type	1541H Alloy Steel

GENERAL
Position	Rear
Housing End Style	Big Ford/New Style (Torino)
Wheel Studs Included	Yes
Finish	Natural
Sold in Quantity	Pair
Offset	2.50"
Stud Diameter	0.68"
Cut to Fit	Yes

Ratings & Reviews

13 Reviews

Overall Assessment

Customers highly recommend our product for its quality and practicality, as evidenced in their restorations of classic vehicles like a 53 Buick Special. Noted for its fine workmanship, users find it highly usable with various applications, some even making minor modifications to fit specific parts. Our product consistently earns praise for its outstanding performance and superior materials, making it a preferred choice for car enthusiasts.

Write A Review

13 reviews

Filter by Ratings

Sort Reviews

Great product works great. I would order it again if needed.

5.0

3 months ago

Hot Rod 56

Tennessee

Verified

Great product love the bearings is already pressed on good quality

Would Recommend

Yes

5.0

5 months ago

Zzz

North Pole, Alaska

Verified

These axles were just what I needed. I like the extra long spins to cut the fit the length.

Would Recommend

9 inch ford cut to fit axles

5.0

8 months ago

grand rapids mi

Verified

Nice to be able to cut the axle to fit whatever length you narrow the rearend to

Would Recommend

I would buy this

5.0

9 months ago

mike

Verified

they worked out great for this 9 inch fore rear end

Would Recommend

I would buy this again

5.0

10 months ago

Lawnbouy

Alberta Canada

Verified

Well made good hard material

Would Recommend

Great kit

5.0

a year ago

Jonyjeeper

Spokane

Verified

Quality kit, good price, cut very easy with cutoff wheel. Helped me adapt from 5x5.5 to 5x4.5 pattern.

Would Recommend

I BOUGHT ANOTHER ONE ONE WEEK LATER

5.0

a year ago

SPOT

Hamilton Ohio

Verified

INSTALL 9 INCH REAR IN A 1955 FORD PICKUP

Would Recommend

very well made

5.0

2 years ago

hrg

86404

Verified

fits perfectly

Would Recommend

I highly recommend

5.0

2 years ago

Merc.

Fort Worth tx

Verified

Narrowing Rear axle

Would Recommend

Would buy again

5.0

3 years ago

53 Buick

Washington nc

Verified

Restoring 53 Buick Special. Great products, all the time

Would Recommend

Load More Reviews

Showing 10 of 13 reviews

Questions & Answers

1 Question • 1 Answer

Sort Questions

Are the axle bearings standard or tapered ?

by Jim

• 3 years ago

1 answer

View Answer

1 of 1 questions shown