8.5 mm Universal Spark Plug Wire Set, 90 Deg Boot and Looms

Spark Plug Wires

Routing spark plug wires is an art form. It takes patience and time to route your wires away from the headers, through separators and to the distributor cap. Some wire sets fit perfect, but a lot of people want to build their own so they can route them exactly how they see fit. Our Universal spark plug wire sets come with the spark plug terminal and boot installed with the other end open. Distributor cap boots and terminals are included so you can cut the wire to the desired length, then install the terminal with the supplied Mini-Stripper-Crimper. It's a little more work, but in the end it will be worth it.

Features:

• Includes both socket-style and spark plug-style boots and terminals
• Extra long 8.5mm wire so you can cut to your desired length
• Includes Mini-Stripper-Crimper
• Wire Lengths: 2- 56", 2- 50", 2- 42", 2-32" and Coil Wire 32"

These plug wires do require assembly although the plug end is alread installed.  Both HEI and socket style distributor ends are supplied.

Learn how to properly attach new spark plug terminals and boots by reading our tech article. How to Install Spark Plug Wire Ends.

Wire Dividers

Separate your plug wires to keep them from arcing across one another with these MSD Pro-Clamp wire separators.

Set is supplied with two 4-wire, two 3-wire, and four 2-wire separators.

Installation Instructions (PDF)