5/8 Inch Wheel Stud and Double Sided Lug Nuts Kit, Fine Thread

Oversize 5/8 Fine Wheel Stud, Long Knurl

• Knurl Length: 0.375"
• Thread Length: 1.5"

Wheel Lug Nut, Steel 5/8 Inch RH Fine Thread Double Taper

Use these oversized 1 Inch Hex Steel lug nuts in place of those 'puny' stock size lug nuts.  Double-sided 45° seat design for quick and secure fastening.

You will need a 1" hex (6-sided) socket. 

5/8-18" Fine Thread fits most racing wheels.

• Oversized design for increased strength and durability
• 45° taper
• 5/8" RH Fine Thread, Double Taper

What's The Angle
Most racing wheels have a 45° seat for the lug nut to seat in while most street wheels use 60°. By using 45° the lug nut is able to clamp tighter over a larger area, which helps keep your wheels on the car where they belong.

If you mix and match street and race wheels or lug nuts you are just asking for trouble. All our lug nuts are 45° and designed to be used with racing wheels.

 Speedway Motors Drill Bit for 5/8" Wheel Studs

43/64" wheel stud drill bit with 1/2" shank. Used to drill out hubs and axle flanges for 5/8" wheel studs with .685 knurl diameter.