|
#113673
1955-1957 Chevy Rear Sway Bar Kit, 3/4 Inch
7/8 Inch7/8 Inch (Nomad)
$190.99
/each
In Stock
Quantity
Need Help? Call to Order
Add to a list
Select a vehicle to verify Fitment
Select Vehicle
Key Specs
| MFG. Part # | 113673 |
| Brand | Speedway Motors |
| Position | Rear |
| Material Type | Steel |
| Finish | Powder Coated |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicySpeedway Motors 113673 Details
Speedway Motors 113673 Details
These rear sway bars are designed as a performance replacement upgrade for your classic Chevy muscle car. They feature a 3/4" diameter solid steel bar and come with all hardware needed for a successful installation.
- Achieve flatter cornering
- Complements front sway bar to reduce understeer and gain more neutral handing
- Adds to cornering stability at speed
- Solid steel 3/4" diameter bar
- Includes polyurethane bushings for increased responsiveness
- Black powder coated finish
- Corrosion resistant zinc plated hardware included
Fits:
- 1955-1957 Chevrolet Ful-Size and Station Wagon
Charts
Guides & Documents
Speedway Motors 113673 Specifications
Speedway Motors 113673 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 113673 |
| Brand | Speedway Motors |
| Position | Rear |
| Material Type | Steel |
| Finish | Powder Coated |
| GENERAL | |
| Overall Width | 41" |
| Centerline of Holes | 39.658" |
| Hardware Included | Yes |
| Tube O.D. | .75" |
| Notes | Front to Rear is 9.25 / the bump is 4" in and 2.658 tall |
| Sold in Quantity | Each |
Ratings & Reviews
3.5
2 Reviews
Customers highlighted the product's impressive effect on handling and stability, particularly minimizing body roll during cornering and improving control in crosswind situations. However, there were some concerns regarding the fitting of parts, such as end links being too short and a shortage of lock nuts supplied with the kit. Despite this, customers found workarounds and remained satisfied with the superior performance of the product.
Ratings & Reviews
3.5
2 Reviews
Customers highlighted the product's impressive effect on handling and stability, particularly minimizing body roll during cornering and improving control in crosswind situations. However, there were some concerns regarding the fitting of parts, such as end links being too short and a shortage of lock nuts supplied with the kit. Despite this, customers found workarounds and remained satisfied with the superior performance of the product.
3.5
2 reviews
5
1
4
0
3
0
2
1
1
0
Filter by Ratings
Some parts don't fit.
2.0
9 years ago
Big Al
Set. Anne, MB, Canada
Verified
The end links received with the kit were too short. They look like the ones for my front sway bar. I'll have to use some threaded rod to make this kit work. I also had to buy more lock nuts. There were only two supplied but ten are required.
Would Not Recommend
Definitely a must have to improve handling.
5.0
9 years ago
John
Chesapeake VA
Verified
Takes the body roll out of cornering. More stable on cross wind conditions
Would Recommend
Showing 2 of 2 reviews
Questions & Answers
Questions & Answers
1 Question • 1 Answer
What is the overall width of bar bolt hole to bolt hole. lenght around rear end and distance from center of outer elbows to bolt hole. Trying to find something that will work with a few frame mod.'s for my classic.
by Charles
• 8 years ago
1 answer
View Answer
1 of 1 questions shown
Fitment
Fitment
1955-1957 Chevy Bel Air
1957 Chevy Del Ray
1955-1957 Chevy One-Fifty Series
1955-1957 Chevy Sedan Delivery
1955-1957 Chevy Two-Ten Series