18 Inch Kevlar -3AN Brake Line Kit, 3/8 Inch or 10mm, 3/8-24 IFF

• (2) Straight -3AN 18" Lightweight Kevlar Brake Lines
• (2) -3AN Banjo Adapter Fittings - 3/8" (10MM)
• (2) -3AN Male Adapter Fittings - 3/8"-24 IFF Straight
• (2) Steel 10MM x 1.50" Brake Banjo Bolts
• (2) Removable Brake Line Retaining Tabs w/Clips
• (5) 3/8" (10MM) Crush Washers

Lightweight Kevlar Brake Lines

• Lightweight Kevlar brake lines are stronger than braided brake lines
• Kevlar lines take more abuse with less expansion
• Smooth and will not rub off your paint like braided lines can
• Perfect for brake lines, clutch lines and gauge lines
• Straight -3AN aluminum fittings on both ends
• 18" brake line length
• 2,900 PSI working pressure
• 8,700 PSI burst pressure

Metric Banjo Adapter Fittings

• Adapt a 3/8" or 10mm-1.5 banjo bolt to a AN style brake line
• Steel construction
• Zinc plated to resist corrosion
• Fitting End A: 3/8" or 10mm
• Fitting End B: -3 AN
• Overall Length: 1.75"
• Inside Diameter: 0.394"
• Overall Width: 0.676"

IFF Adapter Fittings

• Adapt 3/8"-24 Inverted Flare Female (IFF) to -3AN Male
• Commonly used in brake systems when converting a 45-degree flare (IF to a 37-degree flare (AN)
• Steel construction
• Zinc plated to resist corrosion
• Fitting End A: -3AN Male
• Fitting End B: 3/8"-24 I.F. Female
• Fitting Angle: Straight

Brake Banjo Bolts

• Designed to fit OEM brake lines and calipers
• Zinc-Plated to resist corrosion
• Leak-free performance
• Consistent fluid pressure delivered to brake caliper
• Steel construction
• 10MM x 1.50 Inch
• Under head length: 0.93"
• Overall length: 1.18"
• For use with banjo fittings and crush washers

Removable Brake Line Retaining Tabs

• Bolt or rivet to your frame rather than welded
• 5/8" brake line hole with two 3/16" mounting holes
• Two tabs and two brake line retaining clips
• Steel construction
• Overall thickness: 0.11"
• Inside diameter: 0.63"

Crush Washers

• Crush washers come 5 in a package
• For 3/8" or 10mm fittings
• Aluminum construction