Bill Smith
Founder, 1929-2014
Speedy Bill
Since 1952
Speedway Motors Logo
America's Oldest Speed Shop ®

Search

Canadian Leaf

LS1 Complete Fuel Delivery Kit

SAME DAY SHIPPING! Most orders ship within 24 hours.

Specs
Overall Height:
5.75
Overall Length:
7.75
Sold in Quantity:
Kit
Inlet Size:
0.38
Pressure Rating:
58 lbs
Outside Diameter:
2.23
Outlet Fitting:
5/16" hose
Flow Rating:
43 GPH @ 40 PSI, 39 GPH @ 80 PSI
MFG. Part #:
91012805
Filter Element Type:
Paper
LS1 Complete Fuel Delivery KitLS1 Complete Fuel Delivery KitLS1 Complete Fuel Delivery Kit
LS1 Complete Fuel Delivery Kit

Click image to enlarge

Please NOTE the following about this product:

  • This item is sold as a kit.

Details

Reviews

Q & A

What's in the Box

To make your LS1 transplant a little less painful, we put together these kits for you. If you already have a fuel pump in the tank, use the filter/regulator kit 910-12800.

This kit includes a high pressure MSD in-line pump capable of 43 gph @ 40 psi or 39 gph @ 80 psi, a filter/regulator assembly, and all necessary fittings (including fuel rail fitting). Pump draws only 5.4 amps and supports up to 500 horsepower. Pump features 3/8" hose barb inlet and 5/16" barb outlet.

Hose and additional fittings sold separately. MSD pump requires the use of 5/16" high pressure rubber hose with appropriate fuel injection hose clamps for the pressure side of the pump.

Notes

The inlet side of the filter/regulator is the end with the (2) male port tubes.  The larger 3/8" tube is the pressure inlet from the pump.  The smaller 5/16" tube is the return to the tank.  The female side of the filter/regulator utilizes the male 'snap' in fitting.  This is the outlet side of the filter for the line to the fuel rail of the engine.

Specs

  • Principal Application:  Chevrolet Corvette ('99-'04)
  • Filter Style:  Fuel (Complete In-Line) Filter
  • Filter Service:  Fuel
  • Filter Type:  Full Flow
  • Filter Media:  Paper
  • Filter Height:  5.755"
  • Filter Outer Diameter Top:  2.230"
  • Nominal Micron Rating:  5
  • Regulated Pressure:  58 psi (fixed, non-adjustable)
  • Pump Flow @ 40 psi:  43 gph (282 lb/hr) gasoline
  • Pump Flow @ 80 psi:  39 gph gasoline
  • Pump Operation:  12 volts/5.4 amps
  • Pump Inlet:  3/8" hose nipple
  • Pump Outlet:  5/16" hose nipple
  • Includes 2 cushioned mounting clamps and 4 mounting bolts

You may also be interested in:

Lokar TC-1000LS1 Universal LS1 / 350 Ramjet Throttle Cable, 36 Inch
SKU-4911000LS1
                        You will need the correct throttle cable for your LS1 / 350 Ramjet swap. This cut-to-fit cable looks good and gets the job done.
                    
Auto Meter 2177 1.5 Inch Hi-Vibration Pressure Gauge, 0-100 PSI
SKU-1822177
                        

These 1-1/2" rugged hi-vibration pressure gauges are made to mount directly on the engine to read fuel or oil pressure. Built tough to take it. 1/8" NPT male thread.

1-1/2" Pressure Gauge Installation Instructions (PDF)

MSD 2225 In-Line Hi-Pressure Fuel Pump
SKU-5472225
                        

Most modern engines have a hi-pressure fuel pump located in the gas tank. If you are transplanting one of these engines into your hot rod, what are you going to do for a fuel pump? This MSD pump can be mounted on the frame and can put out up to 43 gph at 40 psi or 39 gph at 80 psi.

  • Flows 43 gph (282 lb/hr) gasoline @ 40 psi and 12 volts/5.4 amps 
  • Supports most multiport EFI systems up to 500 horsepower
  • Mounts in-line (out of the fuel tank)
  • Roller vane pump mechanism is extremely resistant to clogging and jamming
  • Has 3/8” hose barb inlet and 5/16" hose barb outlet
  • Made in the USA

MSD Rebate (Link)

LS1 Fuel Filter/Fuel Regulator Kit
SKU-91012800
                        

To make your LS1 swap a little less painful, we put together these 2-in-1 fuel filter and fuel pressure regulator fitting kits for you. If you don't have a fuel pump or need an external pump, order the filter/regulator/pump kit 910-12805. 

This kit includes required fuel rail fitting along with the filter/regulator assembly. The EFI fuel regulator pressure is fixed at 58 psi. Hose and additional fittings sold separately.

  • Principal Application:  Chevrolet Corvette (99-04)
  • Style:  Fuel (Complete In-Line) Filter
  • Service:  Fuel
  • Type:  Full Flow
  • Media:  Paper
  • Nominal Micron Rating:  5
LS1 Fuel Filter/Fuel Regulator Only
SKU-91012807
                        

To make your LS1 engine swap a little less painful, we stock this 2-in-1 fuel filter/fuel pressure regulator assembly. This non-adjustable fuel regulator has a fixed pressure at 58 psi. Hose and additional fittings sold separately.

  • Principal Application:  Chevrolet Corvette ('99-'04)
  • Style:  Fuel (Complete In-Line) Filter
  • Service:  Fuel
  • Type:  Full Flow
  • Media:  Paper
  • Nominal Micron Rating:  5
Fuelab 71501 Fuel Pressure Gauge, 0-120 PSI
SKU-91071501
                        

FueLab mechanical fuel pressure gauges featurea black housing with a white face and black text.

  • For use on regulators or fuel rails with gauge ports
  • Direct mount 1/8” NPT fitting
  • 1.5” diameter gauge face
  • Not for use in passenger or driver’s compartments
Lokar TCB-40LS1 1998-99 LS1 Throttle Cable Bracket, Single
SKU-49109899
                        Clean up your LS1 intake manifold with this billet aluminum cable bracket. Available with a single stud for throttle only or a double stud to add cruise control or kickdown cable. Designed to work with part #491-1000LS1.
                    
Lokar TCB-40LS13 2000-04 LS1 Throttle Cable Bracket, Single
SKU-49102004
                        Clean up your LS1 intake manifold with this billet aluminum cable bracket. Available with a single stud for throttle only or a double stud to add cruise control or kickdown cable. Designed to work with part #491-1000LS1.
                    
Lokar TCB-40LS12 1998-99 LS1 Throttle Cable Bracket, Double
SKU-49109999
                        Clean up your LS1 intake manifold with this billet aluminum cable bracket. Available with a single stud for throttle only or a double stud to add cruise control cable. Designed to work with part #491-1000LS1.
                    
Lokar TCB-40LS14 2000-04 LS1 Throttle Cable Bracket, Double
SKU-49102044
                        Clean up your LS1 intake manifold with this billet aluminum cable bracket. Available with a single stud for throttle only or a double stud to add cruise control cable. Designed to work with part #491-1000LS1.
                    
Hi-Pressure EFI Fuel Filter
SKU-91034190
                        

The modern fuel injected engine requires a much finer fuel filter to protect the injectors. This is made of steel. This is a 10 micron fuel filter and is rated up to 60PSI, flows up to 120 gph and is a necessity for any EFI conversion. It includes an AN 6 inlet and outlet. Mounting bracket included.

 

Lokar TC-1000LS148 Universal LS1 / 350 Ramjet Throttle Cable, 48 Inch
SKU-49101048
                        You will need the correct throttle cable for your LS1 / 350 Ramjet engine swap. This cut-to-fit cable looks good and gets the job done.
                    
Aeromotive 16301 30 Amp Fuel Pump Installation Kit
SKU-91616301
                        

These wiring kits from Aeromotive come with everything you need to properly install your electric fuel pump. 

Kit includes:

  • 30 amp 12-volt DC relay
  • 30 amp 12-volt DC circuit breaker
  • 25 ft. gauge red wire
  • 3 ft. gauge black wire
  • Misc. ends and connectors
Walbro GSL392 Inline Racing Fuel Pump
SKU-960392
                        These aluminum racing Walbro GL392 inline fuel pumps feature a 255 LPH free flow rate and 60 psi maximum pressure.  They have a lightweight, compact design for durability and simplicity.
  • Overall Length: 6.44"
  • Outside Diameter: 1.70"
  • Aluminum material
  • Natural finish
  • 255 LPH free flow rate
  • 60 psi maximum pressure
  • 10mm X 1.0 inlet size
  • One inlet, female threads
  • 10mm X 1.0 outlet size
  • One outlet, female threads
  • Lightweight, compact design
  • Hardware NOT included

Be sure to include our hardware installation kit and AN 8 fitting for these Walbro GL392 inline fuel pumps before purchasing. (960929 and 9603040)

Lokar XTCB-40LS1 Black LS1 Throttle Bracket, 1998-99 GM, Single Stud
SKU-491401
                        

This billet aluminum bracket mounts to the side of the LS1 manifold and is comes with a single stud for throttle only. 

Lokar TCP-1000LS1 36 In Polished LS1/350 Ramjet Hi-Tech Throttle Cable
SKU-491001000
                        

Looking for more shine in your engine compartment? Try Lokar's Polished Hi-Tech Throttle Cables. Lokar's polished cables are available in stainless steel braided housing or black housing. They are designed with a specially extruded liner for extended life of the cable – not to be confused with ordinary braided brake hose. Cables are equipped with polished aluminum fittings and polished aluminum ferrule to eliminate fraying. "U-Cut-to-Fit" outer housing is available in 36" lengths with a "U-Cut-to-Fit" stainless inner wire. Clevis is designed without cotter pins or set screws. Adapts to factory and aftermarket pedals. Cables mount nicely with Lokar's array of bracket and return springs (sold separately). Kits complete with installation instructions. Pair up with a polished kickdown.

  • 36" long
  • GM LS1/Ramjet applications
  • Specially extruded liner for extended life of the cable
  • Aluminum fittings with ferrule to eliminate frayed cable ends
  • Adaptable for all types of manifolds including tunnel ram, blower manifolds and Weber induction systems
  • Complete instructions included

Throttle Body and Carb End Fittings Guide (Link)

491-001000 Instructions (PDF)

Lokar TC-1000LS160 Hi-Tech LS1 / 350 Ramjet Throttle Cable, 60 Inch
SKU-4911000160
                        Lokar Hi-Tech Throttle Cable features a stainless   steel braided  housing.  They are designed with a specially extruded liner for extended    life of the cable – not to be confused with ordinary braided brake    hose.  Cables are equipped with aluminum fittings and aluminum ferrules    to eliminate fraying.
Kits come complete with installation instructions.
Aeromotive 18688 Phantom In-Tank Fuel Pump System for EFI Engine Swaps
SKU-91018688
                        These universal kits work on any 6" to 12" deep fuel cell even with uneven sealing surfaces.  Mounts your pump in tank and features a return line and a vent line.
  • 340 Stealth Fuel Pump
  • Supports up to:
    • 700 HP EFI Supercharged
    • 1000 HP Carbureted Supercharged
  • Black anodized hanger assembly
  • (3) ORB-06 Ports – Supply, Return, Vent
  • Fuel resistant baffle / basket (Includes: Foam and Bladder)
  • Universal high flow pre-pump filter
  • Modular design can be cut to height to fit almost any fuel tank
  • EFI or Carbureted
  • Turbine pump mechanism increases durability.
  • Must be used with a return style system
  • In-tank use only

Fuel Injected Systems Specs and Recommendations Chart (Link)

Carbureted Systems Specs and Recommendations Chart (Link)

LS1 Fuel Filter/Regulator Pump Kit
SKU-91012806
                        

Outfit the fuel system for your LS1 swap with these fuel filter/regulator pump kits.  They feature a Walbro GL392 inline fuel pump (960-392) with all necessary mounting hardware and fittings for a successful installation.  These pumps have a lightweight, compact design for durability and simplicity.

  • Aluminum racing pump
  • 255 LPH free flow rate
  • 60 psi maximum pressure

Includes:

  • (1) Walbro 960-392 Inline Fuel Pump
  • (1) Walbro Installation Kit with Bracket
  • (2) -6 AN Fittings for Walbro
  • (1) LS1 Fuel Filter/Regulator
  • (1) -6 AN to 3/8" Push-On for EFI fitting
  • (2) Blue LS1/LT1 -6 AN-3/8" fittings
  • (1) Blue LS1/LT1 -6 AN-5/16" fitting