GMC C35 TKO Chassis and Suspension Parts

Follow along as we give our C10 truck project a much needed dose of suspension travel with a bolt-on C-notch kit.

In Episode 3 of our C10 build, we install a front suspension kit and finally have a rolling chassis!

In Episode 2 of our '68 C10 build, we rip it apart, clean up 54 years of rust and dirt, and get to work on the rear suspension.

Caster and camber are critical adjustments to your car's suspension alignment. It's important to understand what caster and camber are as well as how they can affect your car's performance.

Drag racing shocks can make a big difference in your drag car's performance. Here's a guide to what's available and some options to hook up your car at the dragstrip.

There's a lot going on with your car's front suspension geometry. This guide covers some of the most important suspension concepts, from caster and camber to toe and Ackerman angle.

Watch as we install a front suspension lowering kit on our 1968 Chevy C10. Upgrades include disc brakes with a 5 on 5” bolt circle as well as 2” drop springs and 2 ½” drop spindles.

This article guides you through the process of repairing and painting a subframe for a 1967 Poncho Firebird. See how the front suspension gets an overhaul including new G-comp spindles and a disc brake kit.

We will show you the differences among traditional I-beam and tube axles and suspension designs used on hot rods; the differences between cross and traditional steering, measuring for springs, what spindles to choose, and much more.

Learn about rack and pinion steering and the benefits to this specific system. This type of steering design uses a set of gears to convert rotational motion into linear motion. Find out more on the differences between manual vs. powered styles.