Pico Ford Mainline Fasteners and Hardware Parts

Speedway Motors employee Jess M. walks us through adding a little salt flat flair to her 1933 Ford coupe, by using moon discs and quarter turn fasteners.

There are several types of quarter-turn fasteners used in the performance automotive aftermarket and in this buyer's guide we'll help show you the correct fastener for your application and how some of the most common types of fasteners are used.

Preventative maintenance is crucial for hot rods. In this article, Jess shows you how to place a front wheel cylinder on an early Ford.

Heath Petzoldt walks us through the process of putting different types of king pins together in this video. Follow along to boost your kingpin assembling confidence!

Electrical wiring is one of those tasks that enthusiasts dread tackling on their own. We're here to tell you that wiring your project vehicle is something you can do with a little help from your friends at Speedway Motors!

Learn how to replace the hinges on your vehicle. Follow along as our expert replaces the hinge pins and bushings on his 1976 Chevrolet Laguna S3 with a kit.

Tim talks about the process of upgrading the factory hubs on his 1929 Roadster project with new manufacture units courtesy of Speedway Motors.

This article guides you through the process of repairing and painting a subframe for a 1967 Poncho Firebird. See how the front suspension gets an overhaul including new G-comp spindles and a disc brake kit.

In this Tech Tip, a returning customer asks for advice on wiring harnesses for his ’29 Ford roadster project.

Hooker headers are installed in a 1967 Pontiac Firebird for increased power and a boost in performance. See how to work through fitment of the steering box, clutch Z bar and starter.