1982 Chevy P30 Control Arm Bushings

Learn how replace lower and upper rear control arms. Read up on racer Steve's A-body control arm replacement and the bushings included kit he recommends.

Speedway Motors employee Steve upgraded the trailing arms on his 1976 Chevrolet Laguna with some spherical bushings.

Have a 1970-1994 GM A- or X-body in need of some new lower control arms? Take a look at what Speedway Motors' employee Steve L. has to say about our lower control arms!

Looking for a cost effective way to upgrade the front of your car? This article shows the steps to replace upper and lower stock control arms with tubular control arms for added suspension strength.

Save some weight by swapping in some upgraded control arms! Employee Steve L. reviews the 1970-81 Camaro Upper Control Arm.

Next up is the suspension on Jeff's 1967 Chevelle project. Learn how to properly disassemble and remove components, such as the spindles and brakes. See tips on replacing the control arm bushings and using the right tools to get the job done.

In this Tech Tip, John responds to a customer question about tubular control arms.

Now that the control arms have been replaced on Jeff's 1967 Chevelle, the next step is to prep the control arms for use with coil-overs. See how to apply shock absorber mounts and the steps it takes to complete this conversion.

In this budget build, a GM rear end is upgraded in order to hold 400+ HP. See how spherical bushings are replaced in a used 8.5” GM 10 bolt rear end.

In this Tech Tip, John answers a customer question about finding the right axle length for his 1931 Model A.