1956 Studebaker E7 Headlight Wiring Harnesses

A guide on how to install a universal wiring harness in a car. Read tips on properly wiring taillights, headlights, gauges, ignition switch, steering column and more.

Check out this headlight wiring and taillight wiring diagram.

In this Tech Tip, a returning customer asks for advice on wiring harnesses for his ’29 Ford roadster project.

In this Tech Tip, John answers a customer question about the Speedway 12 Circuit Wiring Harness.

In this Tech Tip, John responds to a customer request for our recommendations on brake kits for his ’56 F100.

This project consists of using welding cable to relocate a battery to the trunk of a 1967 Chevelle. Learn the benefits of using welding cable over normal battery cable and how line clamps are used to secure the wire to the frame rail.

To keep this project moving forward, Jeff installs a gear reduction mini starter on his big block. See how to apply the mini starter on 153 or 168 tooth flexplates.

Learn how to equip your car with A/C by installing the Vintage Air GenIV SureFit Complete Kit. Jeff installs this kit in his 1967 Chevelle while making some vent modifications to enhance the look and direct air better.

Learn the installation process of a drive shaft loop kit in a 1967 Chevelle. NHRA requires a driveshaft loop if you're going to run slicks on the drag strip!

Jeff preps the rear end housing to secure the brake lines and shows how to fasten bolt-on brake line tabs on the lower trailing arm bracket. Follow along as he applies Wilwood Dynalite Calipers to his 1967 Chevelle.