Product Summary

Midget, Sprint Car, 0-15,000 RPM RPM Range

  • Both the overall height and width measure a total of 3.13"
  • For use with Magneto and Point Type Ignition distributors ONLY
  • It is factory set for 8 cylinder engines and will function up to 15,000 RPM
  • Designed to accept any standard alkaline 9 volt battery to function for many hours of operation
  • This digital tachometer will work with 4, 6 and 8 cylinder engines using an MSD ignition or a magneto
See more details

Key Specs

MFG. Part #XTREME ACCU-TACH
BrandXtreme Fuel Stick
RPM Range0-15,000 RPM
See more specs

Need To Know

Quick and Easy Returns

Return Policy

Xtreme Fuel Stick XTREME ACCU-TACH Details

The Xtreme Accu-Tach digital tachometer will work with 4, 6 and 8 cylinder engines using an MSD ignition or a magneto. The Xtreme Accu-Tach is factory set for 8 cylinder engines and will function up to 15,000 RPM. This digital tach accepts any standard alkaline 9 volt battery to function for many hours of operation. For use with Magneto and Point Type Ignition distributors ONLY.

WARNING: It DOES NOT work with Electronic Ignitions that use a dedicated tach output wire such as MSD 6 Series and HEI.

When the display button is pushed after your last race, the Accu-Tach will display four numbers:

  • 1st number is the highest RPM turned in the last race
  • 2nd number is the low average RPM turned in the last race
  • 3rd number is the high average RPM turned in the last race
  • 4th number is the time in seconds your engine took to rev from your low average RPM to your high average RPM

The display button has three different functions:

  • Starts the display cycle of highest RPM, average low RPM, average high RPM and ramp time
  • Resets any stored information if held for more than five seconds
  • Displays the engine's current RPM for fifteen seconds while engine is running

 

Charts

Xtreme Fuel Stick XTREME ACCU-TACH Specifications

KEY SPECS
MFG. Part #XTREME ACCU-TACH
BrandXtreme Fuel Stick
RPM Range0-15,000 RPM
GENERAL
Overall Width3.13"
Overall Height3.13"
Bezel IncludedYes
NotesIncludes wiring pigtail and mounting brackets.
Sold in QuantityEach

Questions & Answers

1 Question • 1 Answer

How do I change the factory settings from 8 cylinder to 6 cylinder I have just purchased the unit and noticed in the info sheet that the unit is factory set for an 8 cylinder engine. I don't want to open up the unit if I don't have to.

by MickF

• 12 years ago

1 answer

1 of 1 questions shown

Customer Impersonation Script