WindChill® 67-69 GM F-Body SBC Alum 3-Row Rad/Shrd/Fan/Cap, Plain

• Formed aluminum end tanks with high-flow 3-row aluminum core
• Furnace brazed construction with TIG welded end tanks, no epoxy sealer or tank crimps/O-rings to fail
• Built to OEM production dimensions to fit your 67-69 GM F-Body perfectly
• Single pass crossflow radiator core to maximize coolant thermal transfer
• Three rows of .790-inch core tubes for extra coolant capacity and more cooling fin contact
• Approximate 17 percent increase in cooling system capacity over typical 2-row radiators
• Billet aluminum filler neck is stronger and seals better than cast filler necks
• Features correct diameter and angle 1.50” upper and 1.75” lower radiator hose fittings
• Integral transmission cooler uses standard 1/2-20 inverted flare female (IFF) fittings
• Complete cooling solution features custom fan shroud, 16-inch cooling fan, and billet cap

Keep Your 67-69 GM F-Body Cool Using Our WindChill® Crossflow Aluminum Radiator Kit

The stock GM F-body radiator found in GM’s pony car fighter (Camaro and Firebird) were your typical copper/brass construction with two rows of cooling within the core. These Chevy muscle car radiators handled standard production engine cooling with ease, but once owners started turning up the performance dial cooling issues often reared their ugly head, causing overheating or other cooling system issues. Like any performance V8, the small block Chevy engine requires a properly sized radiator for 350 Chevy engines to adequately control the engine’s thermal needs.

Once you begin upping compression, adding timing, and bolting on performance parts, the stock cooling system cannot keep up with the engine’s thermal demands. Adding a larger aftermarket aluminum radiator isn’t always physically possible, so going with additional cores is your best option to rein in those engine temps. Our WindChill® 3-core direct fit aluminum performance radiator for small block Chevy powered 67-69 GM F-Body cars takes the guesswork out of building the proper cooling system for your GM muscle car build. It is designed to work and fit perfectly with OEM-style mounting brackets directly to the core support, just like GM intended, and OEM-spec upper and lower cooling system hoses. It also includes a built-in automatic transmission cooler, just like the original.

Three Row Core for Increased Thermal Transfer and Greater Coolant Capacity

If the stock two rows of 1-inch cooling tubes are good, three rows of cooling tubes are better, right? Not always, but it can be. Just adding a third row or “core” to a two core Camaro radiator can often increase the thickness of the Camaro radiator core to the point there are fitment issues in the vehicle, or the core thickness becomes too much for the typical electric or engine driven fan to pull air through, negating the benefit of the additional core tube. Our WindChill® three core GM F-Body radiators use .790-inch core tubes, so our aluminum three row Camaro radiator is only 7/16-inch thicker yet has a 17 percent increase in coolant capacity. The additional coolant tube in our three row radiators also provides more thermal transfer to the cooling fins that surround the core tubes, providing better cooling with minimal additional core thickness. It is the best solution for increased coolant capacity and thermal transfer efficiency without causing fitment issues in most installations.

Crafted from aluminum with stamped and dimple reinforced end tanks for the best heat transfer and the lightest weight, our 3-core aluminum performance radiator for small block Chevy powered 67-69 GM F-Body vehicles are completely furnace brazed for a long life in your GM muscle car. No epoxy to crack and fail, no O-ring gasketed end tanks to leak. Just quality build construction that will last. Utilizing a single pass 3-row radiator crossflow design, each aluminum SBC 67-69 F-Body Camaro radiator is ready for your GM V8-powered F-Body cooling system needs. Featuring correct 67-69 GM V8 specific inlet and outlet radiator hose fittings, sized at 1.50-inch at the upper left and 1.75-inch at the lower right respectively, along with a 3/8-inch NPT temperature sensor/switch port. Top and bottom hat channel rails allow installation of most electric fan/shroud packages. Additionally, a standard internal stacked plate style transmission cooler is included and connects to your transmission cooler lines via 1/2-20 inverted flare fittings or can be converted to AN -6 fittings for use with aftermarket AN transmission cooler line kits.

Our WindChill® F-Body radiator kit features a precision fit aluminum fan shroud that covers the entire core for maximum airflow through the radiator. The shroud mounts a single large Speedway Motors HiFlow 16-inch 1,800 cfm fan (fan and shroud mounting hardware included) to ensure your first gen Camaro stays cool during extended idling/low speed cruising. The Camaro aluminum radiator with fan can be controlled via your aftermarket EFI, a manual switch, or one of our cooling fan controller options. Lastly, our WindChill® 67-69 Camaro radiator features a strong billet aluminum radiator neck that utilizes industry standard 1-5/8-inch radiator caps (15psi billet cap included!) and includes a pre-installed 5/16-inch hose barb fitting for use with an overflow tank of your choice to help you create the right small block Chevy cooling system for your 67-69 GM F-Body muscle car project.