Wilwood 140-2117-B Rear Brake Kit - Mopar/Dana Axle, 2.36 Offset
Chrysler 8-3/4", Dana 60, Rear Position, Multi: 5 on 5"/4.75"/4.50" Bolt Pattern, Anodized
Wilwood FDLI Pro-Series rear disc brake kits provide a complete solution for the popularMopar/Danarear axles on applications where parking brake assemblies are not required. Forged billet Dynalite four piston calipers, two-piece hat and rotor assemblies, and high friction pads provide optimized and balanced braking for all types of customized applications.
- Ultralite HP 32 Curved Vane Vented Rotor - 12.19" x .810"
- Forged billet Dynalite four-piston calipers
- Piston Area (in²): 3
- 1/8" NPT inlet
- Minimum Wheel Diameter (in): 15
- BP-10 Smart pads
- Aluminum mounting brackets and hardware
This kit will fit Mopar 8 3/4" and Dana 60 rear axlesequipped with green non-adjustable bearings (Mopar P/N RP400). These kits do not have emergency brake provisions.
Item DetailsMopar/Dana, green brg., 2.36" offset
Notes1. Requires use of Mopar Performance Green Bearing (RP400).
2. Kit fits some 15" wheels. Check wheel clearance diagram in kit installation instructions before purchase.
More Like This
Wilwood 140-2117-DR FDLI Rear Brake Kit, Mopar-Dana 2.36 Off
Wilwood 140-2117-R FDLI Rear Brake Kit, Mopar-Dana 2.36 Off
Wilwood 140-2117-BD FDLI Rear Brake Kit, Mopar-Dana 2.36 Off
Wilwood 140-13303-R DP6 Front Disc Brake Kit, 66-75 Ford Bronco/F-150
Wilwood 140-5591-B FDLI Rear Brake Kit, Mopar/Dana 2.36 Off
Wilwood 140-5255-B FDL Rear Brake Kit, Mopar/Dana 2.36 Off
Wilwood 140-10767-DR FDLI Rear Brake Kit, Mopar/Dana 2.50 Off,Snap Ring
Wilwood 140-10767-R FDLI Rear Brake Kit, Mopar/Dana 2.50 Off, Snap Ring
Wilwood 140-10951 AERO4 Rear Brake Kit, Mopar/Dana 2.36 Off
Wilwood 140-10951-D AERO4 Rear Brake Kit, Mopar/Dana 2.36 Off
Q & A
After getting the control arms and drop spindles installed last time, we are dying to see what it looks like on the ground. Today we are working with the Speedway Deluxe Disc Brake Kit. Josh and Joe are on a roll!
Tim talks about the options we have for early Ford drum brakes.
Project Chevelle upgrades the 4 drum brakes single master cylinder that was an unfortunate set of boxes checked on this Chevelle’s order sheet.
Early Ford Bolt-on Brake Conversion
In this Tech Tip, a customer asked about finding a set of disc brakes for his 1949 Ford F1 pickup, with one caveat. He wants to use the factory wheels.
Speedway Tech Zach R. talks about the dropped spindles and disc brake conversion he installed on his '55 Sedan Delivery.
In this Tech Tip, John confirms a customer question regarding the need for a proportioning valve on his ’55 F100 brake build.