$303 Off
$303 Off
|
#83514016202
Wilwood 140-16202 C5/ C6 AERO6 Lug Drive Front Brake Kit
- Kit is applicable to both the C5 and C6 Corvette
- Dynamically mounted Spec37 GT directional vane rotors to provide the ultimate brake package for unrestricted road race competition
- AERO6R/ST calipers use a forged aluminum body and feature a Type III Mil-Spec, medium gray color hard anodized finish
$3,688.30
/kit
Factory Shipped
$3,991.20
Save $302.90
Quantity
Need Help? Call to Order
Add to a list
Share
Select a vehicle to verify Fitment
Select Vehicle
Product Summary
Front Position, 14 Inch Rotor Diameter, Anodized, Gray
- Kit is applicable to both the C5 and C6 Corvette
- Dynamically mounted Spec37 GT directional vane rotors to provide the ultimate brake package for unrestricted road race competition
- AERO6R/ST calipers use a forged aluminum body and feature a Type III Mil-Spec, medium gray color hard anodized finish
- Hard anodizing provides superior wear resistance in the piston bores, and high resistance to abrasion and corrosion throughout
- This latest model of the AERO6R/ST calipers features a wider than standard body that accepts 20mm thick pads to add volume for longer service life
Key Specs
| MFG. Part # | 140-16202 |
| Position | Front |
| Wheel Bolt Pattern (in.) | 5x4.75 in. |
| Wheel Bolt Pattern (mm) | 5x120.65 mm |
| Rotor Diameter | 14 Inch |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicyWilwood 140-16202 Details
Wilwood 140-16202 Details
- Kit is applicable to both the C5 and C6 Corvette
- AERO6R/ST six piston radial mount race calipers are coupled with the high cooling capacity of 14
- 00" dynamically mounted Spec37 GT directional vane rotors to provide the ultimate brake package for unrestricted road race competition
- AERO6R/ST calipers use a forged aluminum body and feature a Type III Mil-Spec, medium gray color hard anodized finish
- Hard anodizing provides superior wear resistance in the piston bores, and high resistance to abrasion and corrosion throughout
- This latest model of the AERO6R/ST calipers features a wider than standard body that accepts 20mm thick pads to add volume for longer service life
- Thermlock® pistons are used to reduce heat transfer from the pads to increase fade resistance, and extend service life with decreased temperatures in the caliper body, fluid, and seals
- Internal damper springs and controlled retraction, high-temperature piston seals assure consistent pedal height from start to finish
- Caliper piston volumes are matched for full compatibility with the OE master cylinder output and ABS controls
- The calipers are also fully compatible with manual brake conversions to balance bar pedals using appropriately sized master cylinders
- Spec37 alloy GT series directional vane rotors are dynamically mounted using our new Lug Drive mounting system to forged aluminum hats
- As is with the calipers, the hats are hard anodized for superior wear resistance and extended service life at the load bearing surfaces
- Mounting brackets, including all premium grade fasteners, secure the calipers to the uprights in the stock location with no modifications required
- This championship proven system is completed with high temperature, high friction, race compound pads selected specifically by application
- Installation requires the separate purchase of the stainless steel braided flexline kit that must be ordered according to the model year
Specs
Our rotors are machined and fully e-coated, just like the rotor hats. This is a protectant coating the prohibits surface rust from forming on the exposed surfaces. Once the parts are installed and being bedded in, the brake pad friction and caliper pressure will remove the coating at the spot the brake pads touch. This will expose the silver iron material underneath.
Guides & Documents
Wilwood 140-16202 Specifications
Wilwood 140-16202 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 140-16202 |
| Brand | Wilwood |
| Position | Front |
| Wheel Bolt Pattern (in.) | 5x4.75 in. |
| Wheel Bolt Pattern (mm) | 5x120.65 mm |
| Rotor Diameter | 14 Inch |
| Rotor Type | Vented |
| Caliper Pistons | Six |
| Caliper Finish | Anodized |
| Parking Brake Provision | No |
| Minimum Recommended Wheel Diameter | 18 Inch |
| Rotor Shape | Round |
| Hardware Included | Yes |
| Rotor Style | Drilled & Slotted |
| Front Rotor Included | Yes |
| Front Rotor Diameter | 14.00 in./355.60mm |
| Front Caliper Included | Yes |
| Rear Caliper Included | No |
| Front Spindles Included | No |
| Master Cylinder Included | No |
| Brake Booster Included | No |
| Brake Hoses Included | No |
| Rear Rotor Included | No |
| Bolt Pattern | 5 on 4.75" |
| Color | Black |
| Front Caliper Piston Quantity | Six |
| GENERAL | |
| Sold in Quantity | Kit |
| GTIN Code | 889545098624 |
| Notes | Road Race kits contain high temperature racing pads. Extended low temperature use will cause premature rotor and pad wear. |
| Rotor Thickness | 1.25" |
| Caliper Type | Radial |
| Rotor Material Type | Spec-37 Iron |
| Front Rotor Thickness | 1.250" |
| Front Caliper Material | Forged Billet Aluminum |
| Front Caliper Color | Gray/Silver |
| Brake Lines Included | No |
| Front Rotor Style | Slotted |
| Caliper Color | Gray |
| Caliper Material Type | Forged Aluminum |
| Front Rotor Construction | Vented |
Ratings & Reviews
Ratings & Reviews
Questions & Answers
Questions & Answers
Be the first to ask a question.
Fitment
Fitment
2004-2009 Cadillac XLR
1997-2013 Chevy Corvette