Product Summary

4-Barrel Carburetor Barrels, Alcohol Fuel Type, Satin

  • Design features include a special radius air entry, externally adjustable metering blocks and screw-in air bleeds
  • 4 barrel carb works at a fuel Pressure of 9 to 10 psi at wide open throttle under load
  • Features a 1.400" venturi
  • Will work with 355-406 ci engines
  • Black powder coated finish adds an extra layer of protection against corrosion
See more details

Key Specs

Carburetor Barrels4-Barrel
Fuel TypeAlcohol
Choke TypeNo Choke
CFM Range700-799 CFM
CFM750 CFM
See more specs

Need To Know

Quick and Easy Returns

Return Policy

Willys Carbs WCD64001 Details

The Willy's four barrel carb featuress Holley 750 CFM main bodies, special radius air entry, externally adjustable metering blocks, screw-in air bleeds, black powder coating and Teflon throttle shaft bushings. 355-406 ci. This 4 barrel carb works at a fuel Pressure of 9 to 10 psi at wide open throttle under load.

Charts

Specs

  • 1.400" venturi
  • Fuel Pressure: 9 to 10 psi at wide open throttle under load

CARB Warning

For race/ off road use or for use on pre-1966 vehicles.

Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway, or if installed in vehicles model-year 1965 or older; motorcycles model-year 1977 or older; or off-highway recreational vehicles (such as off-road motorcycles and all-terrain vehicles) model-year 1996 and older. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.

Willys Carbs WCD64001 Specifications

KEY SPECS
MFG. Part #WCD64001
BrandWillys Carbs
Carburetor Barrels4-Barrel
Fuel TypeAlcohol
Choke TypeNo Choke
CFM Range700-799 CFM
CFM750 CFM
Carburetor Flange Type4-Barrel Square Bore
FinishSatin
Material TypeAluminum
ColorBlack
Secondary TypeMechanical
Fuel Inlet TypeDual
Gasket(s) IncludedNo
New or RemanufacturedNew
Throttle Linkage TypeUniversal
Supercharged ApplicationNo
GENERAL
Bolt Hole Pattern5.160" x 5.625"
Sold in QuantityEach

Ratings & Reviews

5

2 Reviews

Overall Assessment

Customers appreciate our product, the Willys carburetor, for its dependability and practical features like the ability to make jet adjustments without removing the ball. Its performance is reliable, often chosen for use on super sportsman cars. However, some draw attention to an issue with the throttle stop and return spring linkage, as the lock nut on the stud interferes with fuel adjustment due to lack of clearance, suggesting a need for modifications. Nevertheless, it's praised for its quality and utility compared to other options on the market.

5

2 reviews

5

2

4

0

3

0

2

0

1

0

Filter by Ratings

Great products

5.0

4 years ago

Mike

Md.

Verified

Have had willies carbs before good dependable products still waiting to install when motor arrives

Would Recommend

There's one issue with the Willys carburetor throttle stop a

5.0

10 years ago

Mike

Pennsylvania

Verified

I'm using the Willys carburetor on a super sportsman car I like the fact that you can make jet adjustments without removing the ball the only issue is with the throttle stop and return spring linkage you are lock nut on the stud is right in line with the fuel adjustment so modification needs to be made there not enough clearance

Would Recommend

Showing 2 of 2 reviews

Questions & Answers

4 Questions • 4 Answers

Can this carb be run on the 604 crate?

by Andy

• a year ago

1 answer

What thread size is used on the bowl inlets?

by Daz

• 4 years ago

1 answer

Is this carb for dirt track?

by Travis

• 9 years ago

1 answer

Venturi size? What size venturi does this carb have?

by MJDRacer

• 11 years ago

1 answer

4 of 4 questions shown

Customer Impersonation Script