Weiand 8124P Street Warrior Polished Intake Manifold 289-302 SB Ford
Carbureted Fuel System Type, Dual Plane Intake Manifold Type, One Carburetor Quantity, Polished
- Get FREE shipping when your order includes this item and exceeds $99! Ground shipping only in the contiguous US.
Looking for the ultimate in high performance street intakes? A lot has changed in the performance world since the time many of the manifolds on the market were introduced 20+ years ago. With the popularity of larger stroker engines and more efficient cylinder head/cam designs has come a need for manifolds to support these larger displacements. Weiand recognized this and has developed a new line of Street Warrior manifolds designed with Computational Fluid Dynamics (CFD) to generate maximum horsepower and torque out of Today's engines. Dyno testing of the new Weiand 8124 found an additional 14 peak HP and 13lb/ft torque over brand E - p/n 2121. Average torque was increased by 9.5 and HP by 8.5 from 2,200 to 6,000 RPM! Testing was performed on a 302 with high flow 58cc heads, 268/279 dur/.522 lift Lunati cam P/N 51023, 600 cfm carb & 1-5/8 headers.
- Low Rise Dual Plane Design builds maximum torque for street performance engines
- Polished Finish
- Square Bore Carburetor Mounting Flange
- Permanent mold casting process for lighter, smoother & better looks
- Exhaust crossover for improved street drivability
- Power band: Idle-5500 RPM
- Height: Front 3.82", Rear 4.75"
- Port Size: 1.82 height 1.02" width
More Like This
Weiand 8124 Street Warrior Intake Manifold 289-302 Ford Small Block
Weiand 8020 Stealth Intake Manifold 221, 260, 289, 302 V8
Power+Plus Hurricane 302 Ford Manifold
Weiand 91054 174 Supercharger Intake Manifold, Polished Finish
Weiand 91053 174 Supercharger Intake Manifold, Satin Finish
Edelbrock 7535 289-302 Small Block Ford Dual Quad Intake Manifold
Edelbrock 7121 Performer RPM Intake Manifold, Dual Plane, Ford 289/302
Edelbrock 7521 Performer RPM Air Gap Intake Manifold, Ford 289,302
Edelbrock 75354 Performer RPM Dual-Quad Air-Gap Intake Manifold, Ford
Edelbrock 2921 Victor Jr. Ford 302 Intake Manifold
Q & A
Tim talks about the Offenhauser 4 x 2 Pacesetter intake.
Dave gives a few tips on how to select the appropriate intake manifold for your project.
Tim talks about the new Edelbrock powder coated cylinder heads and provides a little history on Federal Mogul heads.
Tim talks about his favorite intake manifold, the Might Edelbrock X1.