-11%
-11%
|
#80575471
Weiand 7547-1 IMCA Approved Small Block Chevy Manifold
- Has an RPM range of 2000 to 6500 rpm
- it is IMCA approved and has the logo behind carb mounting pad
- Designed to fit the 1957-1986 Small Block Chevy 262-400 iron heads and 1987-Later GM factory aluminum heads
$279.95
each
In Stock
$314.95
Save $35.00
Quantity
Need Help? Call to Order
Add to a list
Select an engine to verify Fitment
Select Engine
Product Summary
Carbureted Fuel System Type, One Carburetor Quantity
- Has an RPM range of 2000 to 6500 rpm
- it is IMCA approved and has the logo behind carb mounting pad
- Designed to fit the 1957-1986 Small Block Chevy 262-400 iron heads and 1987-Later GM factory aluminum heads
- Intake works best with a higher compression ratio, 280° or more of cam duration and headers with 1-5/8” primary tubes
- Engineered to be the ultimate performance manifold for single 4V applications where increased torque and power is required in the mid and high rpm ranges
Key Specs
MFG. Part # | 7547-1 |
Intake Manifold Type | Single Plane |
Carburetor Flange Type | 4-Barrel Square Bore |
RPM Range | 2,000-6,500 |
Material Type | Aluminum |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicyWeiand 7547-1 Details
Weiand 7547-1 Details
This Weiand X-CELerator manifold was specifically designed with the IMCA racer in mind. It is fully legal for use in IMCA Stock Car and Sportmod Competition!
IMCA Approved - Intake has IMCA Racing logo behind carb mounting pad.
- Single Plane
- Square Carburetor Mounting Flange
- IMCA Approved
- Power band: 2500-7000 RPM
- Height: Front 3.09", Rear 4.06"
- Port Size: 1.85” height 1.15" width
- Weiand Nostalgia Series Intake Manifold
Specs
- Carb Recommendations: 650 - 750 CFM Holley HP
- Manifold height @ front: 3.09"
- Manifold height @ rear: 4.06"
- Port size: 1.85” height x 1.15” width
Guides & Documents
CARB Warning
For race/ off road use or for use on pre-1966 vehicles.
CARB Warning
For race/ off road use or for use on pre-1966 vehicles.
Weiand 7547-1 Specifications
Weiand 7547-1 Specifications
KEY SPECS | |
---|---|
MFG. Part # | 7547-1 |
Brand | Weiand |
Intake Manifold Type | Single Plane |
Carburetor Flange Type | 4-Barrel Square Bore |
RPM Range | 2,000-6,500 |
Material Type | Aluminum |
GENERAL | |
Fuel System Type | Carbureted |
Carburetor Quantity | One |
Finish | Natural |
EGR | No |
Intake Section Included | Complete |
Plenum Material | Aluminum |
Plenum Finish | Natural |
Overall Height | 4.06" |
Port Height | 1.85" |
Port Width | 1.15" |
Bolt Hole Pattern | 5.160" x 5.625" |
Sold in Quantity | Each |
Notes | Weiand reccommends a 650-750 CFM carb. |
GTIN Code | 090127597873 |
Ratings & Reviews
5
5 Reviews
Customers are satisfied with the product's performance, referring to it as "great" and of good quality. Its practicality is praised, especially for specific uses such as in classes or for specialized intake requirements. Users found the product met their needs perfectly, leading some to state their intent to repurchase. While few reviews mention safety, the absence of reported issues suggests a high level of reliability. These confirm the product's superiority over its competitors.
Ratings & Reviews
5
5 Reviews
Customers are satisfied with the product's performance, referring to it as "great" and of good quality. Its practicality is praised, especially for specific uses such as in classes or for specialized intake requirements. Users found the product met their needs perfectly, leading some to state their intent to repurchase. While few reviews mention safety, the absence of reported issues suggests a high level of reliability. These confirm the product's superiority over its competitors.
5
5 reviews
5
5
4
0
3
0
2
0
1
0
Filter by Ratings
I would buy this again
5.0
2 years ago
Tom
Wilson
Verified
Good service
Would Recommend
Exactly what I was going for
5.0
3 years ago
Josh
Moline illinois
Verified
The process went great and the ship time was quicker tha. Expected.
Would Recommend
Weiand 7547-1 Intake
5.0
3 years ago
Goose
Navarre, FL
Verified
Great product - Great product sales support!
Would Recommend
They actually had it !!!!
5.0
4 years ago
Campbell racing
Olivehurst ca
Verified
Been looking all over for this intake y'all finally had one.
Would Recommend
I will buy this again
5.0
5 years ago
S.H.O.P.P.
Webster SD
Verified
This is what we have to run in our class. Overall a good intake on issues with the product.
Would Recommend
Showing 5 of 5 reviews