-7%
-7%
|
#4257531
Weiand 7531 Team G Intake Manifold 1957-1986, 1987-1992
$478.95
/each
Factory Shipped
$518.95
Save $40.00
Quantity
Need Help? Call to Order
Add to a list
Share
Select a vehicle to verify Fitment
Select Vehicle
Key Specs
| MFG. Part # | 7531 |
| Intake Manifold Type | Single Plane |
| Carburetor Flange Type | 4-Barrel Square Bore |
| RPM Range | 3,000-8,200 |
| Material Type | Aluminum |
Need To Know
Need help?
855.313.9176Quick and Easy Returns
Return PolicyWeiand 7531 Details
Weiand 7531 Details
- Single Plane with Isolated Plenum
- Pre -1987 Small Block Chevy Block/Heads.
- 1987-92 Chevy Block/Heads with Modification to 4 Center Mounting Holes
- Plenum raised 2.0" compared to 7530
- Square Carburetor Mounting Flange
- Isolated Water cross-over
- Power band: 3000-8200 RPM
- Height: Front 5.63", Rear 6.56"
- Port Size: 2.10 height 1.24" width
Charts
Guides & Documents
CARB Warning
For race/ off road use or for use on pre-1966 vehicles.
CARB Warning
For race/ off road use or for use on pre-1966 vehicles.
Emissions warning: this part only legal for sale or use in California for racing (competition) vehicles which may never be used, registered, or licensed for use upon a public highway, or if installed in vehicles model-year 1965 or older; motorcycles model-year 1977 or older; or off-highway recreational vehicles (such as off-road motorcycles and all-terrain vehicles) model-year 1996 and older. Any other use renders the vehicle tampered and not legal for use on California public highways (any public street or roadway, public dirt road, public park, or publicly maintained right of way open to the use of the public for vehicular travel). Violations subject to $37,500 penalty per violation per vehicle, revocation of registration, loss of use on California public right of ways, and proof of correction for tampering. There are similar restrictions and penalties under federal law and the laws of all other states with penalties under federal law of up to approximately $45,268 per tampered vehicle and/or engine.
Weiand 7531 Specifications
Weiand 7531 Specifications
| KEY SPECS | |
|---|---|
| MFG. Part # | 7531 |
| Brand | Weiand |
| Intake Manifold Type | Single Plane |
| Carburetor Flange Type | 4-Barrel Square Bore |
| RPM Range | 3,000-8,200 |
| Material Type | Aluminum |
| GENERAL | |
| Fuel System Type | Carbureted |
| Carburetor Quantity | One |
| Finish | Natural |
| EGR | No |
| Intake Section Included | Complete |
| Overall Height | 6.1" |
| Bolt Hole Pattern | 5.160" x 5.625" |
| GTIN Code | 032474753106 |
Ratings & Reviews
Ratings & Reviews
Questions & Answers
Questions & Answers
1 Question • 1 Answer
Is this item for sb or dd chevy
by Richie
• 8 years ago
1 answer
View Answer
1 of 1 questions shown
